Foam Repeated Compression Tester / Foam Compression Testers - Durable & Reliable Solutions
Product Description:
Foam repeated compression testing machine will accurately measure the thickness of the test piece, placed in the compression plate of the testing machine, at the rate of 60 times per minute, compress the specimen at the frequency of 60 times to compress the height of the specimen 50%, reciprocating compression up to 80.000 times, after 30 minutes at room temperature, measure its thickness to convert the compression deformation rate.
Meet the standard:
ISO-7214. JIS-K6767. K6382
Technical parameters:
Compression stroke: 0——50mm
Compression rate: 60cpm
Pressure plate spacing: 200mm
Test size: 200×200mm
Plate area: 30×30cm
Upper pressure plate: V-type exhaust trench distance: 19×19mm
Lower pressure disc: 289 air holes, hole distance: 19mm
Motor: 1/3HP
Counter: LCD, 0——999999
Volume: 60×40×75cm
Weight: 102kg
Power Supply: 1 # AC220. 5A
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Infusion Pump Flow Rate Tester GB 8368 | Compliance Standards GB 8368 - 2018 Disposable Infusion Sets, etc. Main Uses The infusion set flow rate tester is an instrument specifically des... |
 |
Catheter Hydraulic Leakage Tester | Compliance Standards GB/T 15812.1. etc. Main Uses The catheter hydrostatic pressure resistance and leakage tester is a device specifically desig... |
 |
Universal finger friction tester | Brief Introduction The main working principles of this device is through a test head, plus a certain amount of pressure, and carry a variety of ... |
 |
Dynamic footwear water penetration tester / SATRA TM 230 | Application: Dynamic Footwear Water Resistance Tester is designed to determine the dynamic water resistance of all types of shoes. Principle： Th... |
 |
New warm body dummy tester | Product Description In addition to heat dissipation to the surrounding environment through conduction, convection and radiation, the human body al... |
Похожие товары
 |
Bottle Wall and Bottom Thickness Tester | Продавец: Standard Group (Hong Kong) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Продавец: Standard Group (Hong Kong) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Продавец: Standard Group (Hong Kong) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Продавец: Standard Group (Hong Kong) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Продавец: Standard Group (Hong Kong) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
