Suture Needle Penetration and Bending Strength Tester

• 

The Suture Needle Puncture and Bending Strength Tester has broad application prospects and significant application value in the medical device industry. The following is a detailed introduction to its main uses, compliance standards, and technical parameters:

Standards

The Suture Needle Puncture and Bending Strength Tester complies with relevant standards such as ASTM F3014 - 2014 and ASTM F1874 - 98.

- ASTM F3014 - 2014: Specifies the specific methods and procedures for the penetration test of surgical suture needles, aiming to evaluate the penetration performance of suture needles to ensure they can meet requirements in actual use.

- ASTM F1874 - 98: Specifies the specific methods and procedures for the bending test of surgical suture needles, aiming to evaluate the strength and durability of suture needles under bending conditions.

Main Uses

Quality Control for Manufacturing Enterprises: During the production of suture needles, the tester can conduct sampling tests on each batch of suture needles, promptly identifying quality issues in the production process, such as unstable raw material quality or defects in processing techniques. This enables timely adjustment of the production process to ensure the stability and consistency of product quality.

Selecting Appropriate Suture Needles for Medical Institutions: Medical institutions can use the tester to conduct performance tests on different types of suture needles, and based on the test results, select the suture needles that best meet the surgical needs of patients, thereby improving surgical effectiveness and patient safety.

Product R & D and Optimization: R & D personnel in the medical device field can use the tester to evaluate the performance of the design of new - type suture needles. By testing the strength and puncture force of suture needles with different structures, materials, and dimensions, they can optimize the design of suture needles and develop products with better performance.

Technical Parameters

Testing Items:Puncture force, bending strength. Range: Usually can be customized according to actual needs, such as 0 - 50N.

Stations:Designed with multiple stations, which can be adjusted according to test requirements, such as 12 stations.

Accuracy: High - precision sensor, with an indication error usually not exceeding 0.01N or 0.1%FS. (full - scale range).

Needle - clamping Fixture:Fixtures for holding suture needles, such as 4°±2°/s, etc., to ensure the stability and accuracy of suture needles during the testing process.

Speed:The testing speed can be adjusted according to actual needs. For example, the minimum speed is 10cm/min (4in./min), and the maximum speed is 30.5cm/min (12in./min), etc.

Testing Rate:The speed when loading to the set value usually does not exceed 10mm/s.

Power Supply: Usually 220V 50Hz or other voltages and frequencies that comply with local electrical standards.

Другие товары поставщика

	Snap Button Tester | Button Snap Pull Tester	Standard ASTM D7142-2/F963: Standard Consumer Safety Specification for Toy Safety CFR 1500: Consumer Product Safety Commission (CPSC) Hazardous S...
	Vacuum leak tester / Vacuum leak instrument	Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bottles, freeze-dried powder injection bottles, and pr...
	Thermal Insulation Tester JIS L1018	Meet the standard JIS L1018.34.1A method/Knitted fabrics test methods, heat retention (constant temperature method) JIS L1096 8.28.1A method/Gene...
	High Acceleration Shock Test System / Shock Test Machine	Applications: The size of the impact test bench is small, and the bench structure is carefully designed after finite element optimization analysis...
	45-degree dry cleaning tester/ 45 Degree Dry Cleaning Testing Machine	Product Introduction: The instrument is composed of a bottom plate, a control panel and a drum. The clothes to be washed and the dry cleaning agen...

Похожие товары

	Bottle Wall and Bottom Thickness Tester	Продавец: Standard Group (Hong Kong) Limited	The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
	Pinhole Tester / Pinhole Testing Equipment	Продавец: Standard Group (Hong Kong) Limited	The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
	Cork Puncture and Chip Detection Instrument	Продавец: Standard Group (Hong Kong) Limited	The rubber stopper puncture debris detector is a device specifically used to detect the number of...
	Aluminum Ointment Tube Toughness Tester	Продавец: Standard Group (Hong Kong) Limited	The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
	Vacuum leak tester / Vacuum leak instrument	Продавец: Standard Group (Hong Kong) Limited	Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...