martindale abrasion and pilling tester for fabric textile

• 

Martindale Abrasion Tester, to determine the abrasion and pilling resistance of all kinds of textile structures. Martindale Test Equipment complies with ASTM D4966, ASTM D4970, ISO 12947, etc. Martindale Fabric Abrasion Tester will meet your needs when you do Martindale rub test. Please contact us for more information about Martindale Machine or Martindale pilling test methods.

Martindale abrasion tester working principle:
Test piece of fabric is placed in the specimen clamp, and it will be rubbed against with abradant in a Lissajous figure. According to the requirement, once the test piece is broken, test piece should be taken down to calculate its abrasion resistance index, or evaluate its rating of pilling through the visual description.

Testing Standards:
ASTM D4970, ISO 12945.2, GB/T 4802.2/13775/21196.1/21196.2, ASTM D4966, ISO 12947, FZ/T 20020, BS 3424-24/5690, ISO 12947.1/12947.2, M&S P17/P19/P19C, NEXT 18/18a/18b, ISO 5470-2, IWTO-40, JIS L1096 8.17.5 Method E, Woolmark TM 112/196, BS EN 388/530/13770, ISO 20344

Product Information:
The instrument is professionally designed to determine the abrasion and pilling resistance of all kinds of textile structures.
Samples are rubbed against known abradents at low pressures and in continuously changing directions and the amount of abrasion or pilling is compared against standard parameters.
Provided with Touch Screen Controller and unique programming device which includes preprogammable batch and totaliser counters, individual station counters, 4 selectable test speeds with liquid crystal display.

Technical Parameters:
1.Test positions: 9;
2.Count range: 0～999999;
3.Maximum stroke: horizontal 60.5±0.5mm, longitudinal 24±0.5mm;
4.Weight of pressurized materials:
a.Clamp holder assembly: 200±1g
b.Loading pieces for smaller piece: 395±2g
c.Loading pieces for larger piece: 594±2g
d.Stainless steel piece: 260±1g
5.Additional loading weight valid abradent diameter:
Type A 200g(1.96N) Pressure(9KPa) ￠28.8-0.084mm
Type B 155g(1.52N) Pressure (12KPa) ￠90-0.10mm
6.The relative speed with Clamp holder and Abrading table: 20-70r/min(Adjustable);
7.Weight of ample loading hammer: 2385±10g.

Instrument Configurations and Consumables:
1.Specimen holder assembly of 9 sets;
2.9kPa, 12kPa additional loading weight , each of 9;
3.￠38mm, ￠140mm Abradent Fabric/Backing Felt cutter of 1 set;
4.￠38mm, ￠140mm test specimen cutting mat of 1 set;
5.Pilling Test Suite of 1 set;
6.SM-50 Photographs for pilling test of 1 set;
7.EMPA Photographic Standards for Pilling Test of 1 set, and SM-25 Standard Abradent Fabric of 1.6m×5m;
8.Standard Backing Foam. Width of 1.5m, Length of 0.5m. Pack of 4;
9.Standard Backing Felt Piece of 1;
10.￠90mm Standard Backing Felt Discs(Pack of 20);
11.￠38mm, ￠140mm spare blades of specimen cutter, 50 each;
12.Other necessary accessories recommended by manufacturer.

Другие товары поставщика

	Fluorescent UV Test Chamber	This product uses fluorescent UV lamps, combined with temperature and humidity device to simulate the material decline in color, brightness, streng...
	universal wear resistance testing equipment	The Universal Wear Tester is used to test wear and abrasion resistance of fabrics for apparel, shoes, upholstery, automotive, and many other areas....
	High Quality Testing Instrument for Mask burning tester	Introduction: The flame-retardant tester of medical mask is used to test the flame-retardant performance of the mask when it is accidentally contac...
	Маска респираторного дыхания Сопротивление тестер	Тестер респираторной устойчивости маски используется для измерения респираторной резистентности и истекательной резистентности респираторов и масок...
	Scrub Abrasion and Washability Tester	The Scrub Abrasion and Washability Tester is used to test the resistance of paint, varnish or coatings to scratching, wearing, an...

Похожие товары

	WF-EDU-02 Motor & Propeller Test Kit	Продавец: Wing Flying Technologies Co., Ltd	WF-EDU-02 Motor & Propeller Test Kit Product Description Motor & Propeller Test Kitsare...
	WF-EDU-01 Motor and Propeller Test Kit	Продавец: Wing Flying Technologies Co., Ltd	WF-EDU-01 Motor and Propeller Test Kit Product Description Suggested Propulsion system ...
	WF-EN-50 Engine Test Bench	Продавец: Wing Flying Technologies Co., Ltd	Suggested Engine 110cc-350cc Engine Max Hanging Type Engine 20kg ...
	WF-EN-15 Engine Test Bench	Продавец: Wing Flying Technologies Co., Ltd	WF-EN-15 Engine Test Bench Product Description Suggested Engine 110cc Engine ...
	BS EN 12600 Two Tyres Impactor	Продавец: Qinhuangdao Yuanchen Technology Equipment Co., Ltd.	Reference Standard: BS EN 12600:2002Glass in building – Pendulum test – Impact test m...