Falling Sand Abrasion Tester

• 

Standards

GB811-2022.

GB24429

GB/T 38305

GJB1564A

GA/T44. GA293

GA294

GA295

GA296

ASTMD968

ASTMD333

ASTMD1395

ASTMD2205

Main application

Helmet abrasion resistance sand test machine is mainly used to test motorcycle helmets, sports helmets, electric vehicle helmets, fire helmets, rescue helmets, military and police helmets, pilot helmets and other helmets eye protection performance. Widely used in a variety of helmets related to the production of research and development, scientific research, quality supervision and testing, colleges and universities laboratories and other units.

Characteristics

1、The speed regulator can carry out the adjustment of the sample speed, and real-time display.

2、Sand fall gravity tube has three sections of PVC, acrylic or stainless steel tube.

3、Conical sand drop storage port, easy to store the sand drop.

4、The conical design structure at the bottom of the equipment and the low falling disk are convenient to collect the falling sand.

Parameters

1. sand drop tube: height 1650±10mm, material PVC, acrylic or stainless steel.

2. specimen turntable: tilt angle 0-90 ° adjustable. The standard angle of 45 ± 3 °.

3. turntable speed: 0-300r/min, adjustable. The standard speed 250±10r/min.

4. falling sand specifications: particle size of 0.5-0.7mm, the material is natural quartz sand, weight 3 ± 0.1kg (reuse no more than 10 times).

5、Fallen sand form: gravity free fall.

Другие товары поставщика

	AATCC Viewing Board丨AATCC Viewing Board tester	Standards Built to American Association of Textile Chemists and Colorist (AATCC) approved test methods 88B/88C/124/128/143/178. Product Informati...
	Oxidizing liquid time pressure tester	Product Description Conforms to UN Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria 11.6.1 Test 1(c)(i): Time/Pr...
	Infusion Pump Flow Rate Tester	Applications The infusion set flow rate tester is an instrument specifically designed for measuring and monitoring the flow rate of infusion sets....
	Building Material Radiant Panel Test Machine,AS/NZS 1530.3	Products This machine is designed according to AS/NZS 1530.3; Thedeviceviaagasradiantplatetoheatsamplesandwithheatflowmetertocalibration;Testsamp...
	Smoke Density Chamber， ISO 5659，Smoke density testing equipment	Introduction The main principle is to measure smoke density in a particular space, cable or material produced under specific conditions of combust...

Похожие товары

	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	Продавец: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Продавец: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Продавец: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Продавец: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...