Compression Fatigue Testing Machine

Standard

YY/T 0959-2014 (China): Specifies compression fatigue testing protocols for intervertebral fusion devices, including load ratios, frequency, and failure criteria.

ASTM F2077-17 (International): Defines methodologies for evaluating the fatigue strength of intervertebral body fusion devices under compressive loading.

ISO 12189-1: Additional compliance for mechanical testing of spinal implant components.

Product Advantages

High-Frequency Stability: Advanced electromagnetic actuator maintains 0.1–20 Hz frequency range with ±0.05% force accuracy.

Ultra-Precision Loading: 25 kN axial force capacity with 1 N resolution for submicron displacement control.

Dynamic Load Control: Programmable R=0.1–10 load ratios with real-time stiffness compensation.

Biorelevant Environment: Temperature-controlled (37±1°C) lubrication bath with 20±2 g/L protein concentration.

Extended Durability: Capable of 10+ million cycle testing with <0.2% drift in calibration.

Modular Design: Six-station configuration allows parallel testing of multiple specimens.

Product Features

Electromagnetic Servo Motor: 25 kN axial force capacity with programmable load ratios (R=0.1–10).

Triaxial Strain Gauge: Measures axial/radial strains simultaneously (0.1 με resolution).

Dynamic Load Control: 0.1–20 Hz frequency range with programmable waveforms (sine, square, random, custom).

Thermal-Mechanical Chamber: ±0.3°C temperature stability with integrated humidity control (10–95% RH).

High-Resolution Imaging: Optional integration with micro-CT systems for in-situ crack analysis.

Safety System: Emergency stop, overload clutches, and laser-based specimen breakage detection.

Technical Parameters

Parameter	Specification
Max. Axial Force	±25.000 N (25 N resolution)
Frequency Range	0.1–20 Hz (0.01 Hz increments)
Load Ratio (R)	0.1–10 (adjustable)
Axial Displacement	±10 mm (0.1 μm resolution)
Temperature Control	-20°C to +50°C (PT1000 sensors)
Humidity Control	10–95% RH (non-condensing)
Data Sampling Rate	100 kHz (synchronized across 16 channels)
Power Requirements	220V/110V ±10%, 50/60Hz, 3.000W
Dimensions (W×D×H)	2.000 × 1.500 × 2.200 mm
Weight	1.200 kg (including environmental chamber)
Noise Level	<65 dB (A-weighted)

Standard Accessories

Spinal Implant Fixture Kit:

Self-centering collet system (8–20 mm implant diameter compatibility)

Anatomically shaped loading anvils with diamond-like carbon (DLC) coating

Thermal-Mechanical Chamber:

25L capacity with rapid cooling/heating (15°C/min)

316L stainless steel interior with HEPA filtration

CompressionMaster Pro Software:

Automated stiffness degradation tracking and fatigue limit calculation

21 CFR Part 11-compliant audit trail with blockchain timestamping

Remote monitoring via dedicated iOS/Android app

Operator Kit:

Calibrated torque wrench set (0.5–50 Nm)

Specimen alignment gauges (ASTM F2077 compliant)

Calibration Bundle:

NIST-traceable force calibration weights

Strain gauge verification tool

Safety Kit:

Laser safety curtains

Acoustic enclosure with 30 dB noise reduction

Другие товары поставщика

	Ultraviolet Aging Testing Chamber	Equipment Description This test equipment is designed to simulate the sunlight and cause the damage of the sun's ultraviolet light, by exposing the...
	Mechanical Scratch Tester	Application Primary test purposes Coating scratch resistance evaluation Coating hardness assessment based on mechanical damage behavior Determi...
	Stick-Slip – Tribological Test Stand (G-H3P)，Stick-slip friction testing machine	The Stick-Slip Tribological Test Stand is designed to predict stick-slip noise (“squeak” or “creak”) in automotive interior...
	Diaper Anti-Side Leakage Performance Tester	The Diaper Anti-Side Leakage Performance Tester is designed to accurately measure the liquid loss of nonwoven materials and evaluate the anti-side ...
	Bus Seat Tester,Vehicle seat test equipment	The Bus Seat Tester is designed to evaluate the durability, strength, and fatigue performance of bus seating systems in compliance with FMVSS 222 a...

Все товары поставщика

Похожие товары

	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	Продавец: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Продавец: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Продавец: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Продавец: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...