Laminoplasty Plate System Fatigue Testing Machine

Standard

ASTM F2193-18: Specifies static/fatigue testing protocols for spinal constructs, including lamina fixation plates.

ISO 12189-1: Defines methodologies for evaluating mechanical performance under physiological loading.

YY/T 0961-2014 (China): Compliance with static/dynamic testing requirements for spinal interconnection systems.

Custom Protocols: Tailored testing regimens for lamina fixation plate bending/compression fatigue per clinical usage models.

Product Advantages

Anatomical Simulation: 4-point bending fixture replicates spinal curvature (0°–45° lordosis adjustment).

Dynamic Compression Control: 0.1–15 Hz frequency range with ±0.05% force accuracy.

Multi-Axial Loading: Combines axial compression (±25 kN) with anterior-posterior shear (±5 kN).

Biorelevant Environment: 37±1°C saline bath with protein skimmer for in vivo corrosion simulation.

AI-Powered Analytics: Machine learning identifies creep-fatigue interactions in real-time.

Modular Design: Dual-station configuration enables simultaneous specimen testing.

Product Features

Electromagnetic Servo Actuator: 25 kN axial/5 kN shear capacity with programmable load ratios (R=0.1–10).

4-Point Bending Fixture: Self-aligning anvils accommodate plate lengths (30–80 mm) and curvatures.

Dynamic Load Control: Sinusoidal/square/random waveforms with 0.01 Hz resolution.

Thermal-Mechanical Chamber: -20°C to +50°C temperature control with 10–95% RH humidity.

High-Resolution Imaging: Built-in 5MP camera system for crack propagation analysis.

Safety Suite: Emergency stop, overload clutches, and laser-based specimen breakage detection.

Technical Parameters

Parameter	Specification
Max. Axial Force	±25.000 N (25 N resolution)
Max. Shear Force	±5.000 N (5 N resolution)
Frequency Range	0.1–15 Hz (0.01 Hz increments)
Load Ratio (R)	0.1–10 (adjustable)
Bending Angle	0°–45° (0.1° resolution)
Temperature Control	-20°C to +50°C (PT1000 sensors)
Humidity Control	10–95% RH (non-condensing)
Data Acquisition	100 kHz sampling rate (16-bit resolution)
Power Requirements	220V/110V ±10%, 50/60Hz, 3.000W
Dimensions (W×D×H)	2.000 × 1.200 × 2.000 mm
Weight	950 kg (including environmental chamber)
Noise Level	<65 dB (A-weighted)

Standard Accessories

Lamina Fixation Fixture Kit:

Self-centering plate clamps (30–80 mm length compatibility)

Anatomical curvature adapters (0°–45° lordosis adjustment)

Thermal-Mechanical Chamber:

15L capacity with rapid cooling/heating (15°C/min)

316L stainless steel interior with HEPA filtration

LaminoplastyTest Pro Software:

Automated stiffness degradation tracking and fatigue limit calculation

21 CFR Part 11-compliant audit trail with blockchain timestamping

Remote monitoring via iOS/Android app

Operator Kit:

Calibrated torque wrench set (0.5–50 Nm)

Specimen alignment gauges (ASTM F2193 compliant)

Calibration Bundle:

NIST-traceable force calibration weights

Strain gauge verification tool

Safety Kit:

Laser safety curtains

Acoustic enclosure with 30 dB noise reduction

Другие товары поставщика

	Adiabatic Accelerated Calorimeter，adiabatic calorimeter apparatus bulk order	An Accelerating Rate Calorimeter (ARC) is a high-precision thermal analysis instrument that assesses the thermal decomposition behavior and safety ...
	Nissan Scratch Tester ，ISO 1518 ，benchtop scratch mar tester	The Scratch Tester is designed to evaluate the scratch resistance of materials such as automotive interior plastics, exterior coatings, and decorat...
	Burning Manikin System,Burn Test Manikin for sale	The burning manikin system is used to test the overall thermal protection performance of protective clothing.Complete combustion manikin system, wh...
	Direcct flame impingement Tester	Introduction The testerisdesignedaccording to the BS476-12:1991.Method of test for ignitability of products by direct flame impingement.The accura...
	Steel wheel wear testing machine	Meet the standard: GB/T3810.7-2016 "Wear resistance test method for unglazed brick" ISO/DIS10545/6-94 "Unglazed brick resistance to deep wear tes...

Все товары поставщика

Похожие товары

	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	Продавец: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Продавец: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Продавец: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Продавец: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...