Femoral Stem Neck Prostheses Fatigue Testing Machine

Standard

YY/T 0809.6 (China): Specifies neck fatigue testing for femoral stems in partial/total hip arthroplasty.

ISO 7206-6 (International): Defines protocols for evaluating the fatigue strength of femoral head-neck junctions.

ASTM F2023: Additional compliance for dynamic loading of ceramic femoral heads.

Adaptive Protocols: Customizable for emerging standards in biomaterial fatigue testing.

Product Advantages

Electromagnetic Precision: M-Series actuator delivers ±0.1% force accuracy with sub-micron displacement control.

10 Million Cycle Endurance: Proven capability to complete ISO 7206-6’s 10⁷-cycle fatigue test without drift.

R=0.1 Load Control: Advanced servo-hydraulic system maintains specified stress ratios throughout testing.

Real-Time Failure Detection: AI-driven algorithm identifies crack initiation at sub-millisecond intervals.

Ergonomic Workflow: 15.6” touchscreen with multilingual interface (English/Chinese/German) and pre-loaded SOPs.

Modular Test Chambers: Quick-swap environmental pods for simulated physiological testing (-20°C to +50°C).

Product Features

Electromagnetic Actuator: 5.340 N peak force capacity with 0.001 N resolution.

Dual-Axis Loading: Simultaneous axial/torsional loading (50 Nm max torque).

Dynamic Load Control: 1–30 Hz frequency range with programmable waveforms (sine, square, random).

Thermal Chamber Integration: ±0.5°C temperature stability for accelerated aging studies.

High-Speed Imaging Ready: Syncs with external cameras for full-field strain mapping (optional upgrade).

Safety First: Emergency stop, overload clutches, and laser-based specimen breakage detection.

Technical Parameters

Parameter	Specification
Max. Dynamic Force	±5.340 N (11.940 N peak optional)
Frequency Range	1–30 Hz (0.1 Hz increments)
Load Ratio (R)	0.1–10 (adjustable)
Axial Displacement	±10 mm (0.1 μm resolution)
Torque Capacity	±50 Nm (0.01 Nm resolution)
Temperature Range	-20°C to +50°C (environmental chamber)
Data Sampling Rate	50 kHz (synchronized across 12 channels)
Power Requirements	220V/110V ±10%, 50/60Hz, 1.500W
Dimensions (W×D×H)	1.200 × 800 × 1.900 mm
Weight	550 kg (including thermal chamber)
Noise Level	<70 dB (A-weighted)

Accessories

Femoral Neck Test Fixture Kit:

Self-centering collet system (12/14 mm taper compatibility)

Laser-aligned loading anvils with wear-resistant coating

Thermal Environmental Chamber:

15L capacity with rapid cooling/heating (10°C/min)

Corrosion-resistant 316L stainless steel interior

TestMaster Elite Software:

Automated fatigue life prediction (S-N/ε-N curve generation)

21 CFR Part 11-compliant audit trail with blockchain timestamping

Remote monitoring via iOS/Android app

Operator Kit:

Calibrated torque wrench set (0.5–25 Nm)

Specimen alignment gauges (ISO 7206-6 compliant)

Calibration Bundle:

NIST-traceable force calibration weights

Temperature verification probe

Safety Kit:

Laser safety curtains

Acoustic enclosure for noise reduction

Другие товары поставщика

	Solids Spontaneously Igniting Tester	Product Description Conforms to the UN Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria 33.3.1.4 Test N.2: Test ...
	Solid electrolyte analysis device	Standard ISO 9001:2015(Quality Management System) ASTM E1970-21(Standard Guide for Electrochemical Impedance Spectroscopy) IEC 62660-2(Secondary...
	Elastic Tape Fatigue Testing Machine	Product Introduction: This instrument is used to test the elasticity of elastic belt after reciprocating movement. Standards: SATRA TM103 Appli...
	Automotive wire cyclic bending testing machine	StandardThis testing machine aligns with global automotive industry standards for wire harness reliability, includingISO 6722(Road vehicles –...
	Rubber Mooney Viscosity Test machine	Test principle: The Mooney viscometer is used to measure the viscosity of rubber under specific conditions. In the test, the rubber sample was loa...

Все товары поставщика

Похожие товары

	FH-77 Dissolved hydrogen meter	Продавец: Коллирон электроникс лимитед	Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy...
	Xenon Arc Weather Ometer	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
	Xenotest | Light Fastness Tester Si220 (SunTest)	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
	Ozone Aging Chamber	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...
	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ...