Femoral Stem Fatigue Performance Testing Machine

Standard

YY/T 0809.4 (China): Specifies fatigue testing protocols for femoral stems in partial/total hip arthroplasty.

ISO 7206-4 (International): Defines methodologies for evaluating the fatigue strength of femoral stem-bone cement interfaces.

ASTM F2580: Additional compliance for impact resistance testing of modular femoral necks.

Adaptive Protocols: Customizable for emerging standards in additive-manufactured implant evaluation.

Product Advantages

Electromagnetic Precision: M-Series actuator delivers ±0.05% force accuracy with 0.001N resolution.

5 Million Cycle Endurance: Proven capability to complete ISO 7206-4’s 5×10⁶-cycle fatigue test without drift.

R=0.1 Load Control: Advanced closed-loop system maintains stress ratios during dynamic loading.

Real-Time Fracture Detection: AI-powered acoustic emission monitoring identifies micro-cracks at sub-millisecond intervals.

Intuitive Workflow: 21.5” capacitive touchscreen with gesture control and pre-loaded SOPs for 15+ implant geometries.

Modular Environmental Chambers: Quick-swap pods for simulated physiological (-20°C to +50°C) and corrosive environment testing.

Product Features

Electromagnetic Actuator: 2.300 N peak force capacity with programmable load ratios (R=0.1–10).

Triaxial Loading System: Simultaneous axial/torsional/shear loading (50 Nm max torque).

Dynamic Load Control: 1–30 Hz frequency range with programmable waveforms (sine, square, random, custom).

Thermal-Mechanical Chamber: ±0.3°C temperature stability with integrated humidity control (10–95% RH).

High-Speed Imaging Ready: Syncs with external cameras for full-field strain mapping (DIC optional upgrade).

Safety First: Triple-redundant emergency stop, overload clutches, and laser-based specimen breakage detection.

Technical Parameters

Parameter	Specification
Max. Dynamic Force	±2.300 N (5.000 N peak optional)
Frequency Range	1–30 Hz (0.1 Hz increments)
Load Ratio (R)	0.1–10 (adjustable)
Axial Displacement	±15 mm (0.1 μm resolution)
Torque Capacity	±50 Nm (0.01 Nm resolution)
Temperature Range	-20°C to +50°C (environmental chamber)
Humidity Control	10–95% RH (non-condensing)
Data Sampling Rate	100 kHz (synchronized across 16 channels)
Power Requirements	220V/110V ±10%, 50/60Hz, 2.000W
Dimensions (W×D×H)	1.500 × 1.000 × 2.200 mm
Weight	750 kg (including environmental chamber)
Noise Level	<68 dB (A-weighted)

Standard Accessories

Femoral Stem Test Fixture Kit:

Self-centering collet system (12/14 mm taper compatibility)

Laser-aligned loading anvils with diamond-like carbon (DLC) coating

Thermal-Mechanical Chamber:

25L capacity with rapid cooling/heating (15°C/min)

316L stainless steel interior with HEPA filtration

TestMaster Ultimate Software:

Automated fatigue life prediction (S-N/ε-N curve generation)

21 CFR Part 11-compliant audit trail with blockchain timestamping

Remote monitoring via dedicated iOS/Android app

Operator Kit:

Calibrated torque wrench set (0.5–50 Nm)

Specimen alignment gauges (ISO 7206-4 compliant)

Calibration Bundle:

NIST-traceable force calibration weights

Temperature/humidity verification probe

Safety Kit:

Laser safety curtains

Acoustic enclosure with 30 dB noise reduction

Другие товары поставщика

	Office Chair Caster Durability Test device	Implementation standards GB/T4085 EN425 Product features 1. The instrument adopts PLC touch screen control, simple and intuitive operation; 2. ...
	Bag lifting fatigue testing machine	Product Introduction: This machine is suitable for up and down vibration fatigue test of plastic handbag, garbage vest bag, kraft paper bag, woven...
	Wet Microbial Penetration Resistance Testing Machine	The wet microbial penetration tester is mainly used to evaluate the barrier ability of medical protective equipment (such as surgical gowns, isolat...
	Fabric UV resistance tester	Product details:It includes the closest spectral characteristics of the sun's light source, high stability of the UV-visible spectrophotometer, ful...
	Torque - to - Failure Tester for Metal Bone - connecting Screws	Standard YY/T 0662-2008(Chinese standard for orthopedic implant testing) ISO 5832-1(Metallic materials for surgical implants – Wrought stai...

Все товары поставщика

Похожие товары

	FH-77 Dissolved hydrogen meter	Продавец: Коллирон электроникс лимитед	Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy...
	Xenon Arc Weather Ometer	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
	Xenotest | Light Fastness Tester Si220 (SunTest)	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
	Ozone Aging Chamber	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...
	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ...