Femoral Condyles Components Fatigue Performance Tester

Standard

ASTM WK51649: Specifies fatigue testing protocols for metallic femoral components in total knee arthroplasty, including F-N curve generation and 10⁷-cycle endurance verification.

ISO 14879-1: Additional compliance for fatigue testing of total knee joint prostheses.

Adaptive Protocols: Customizable for emerging standards in additive-manufactured and coated implant evaluation.

Product Advantages

Ultra-Precision Loading: Electromagnetic actuator delivers ±0.05% force accuracy with 0.001N resolution.

10 Million Cycle Endurance: Proven capability to complete ASTM WK51649’s 10⁷-cycle fatigue test without calibration drift.

Dynamic Load Control: Advanced closed-loop system maintains specified stress ratios during sinusoidal/random loading.

Real-Time Fracture Detection: AI-powered acoustic emission monitoring identifies micro-cracks at sub-millisecond intervals.

Intuitive Workflow: 21.5” capacitive touchscreen with gesture control and pre-loaded SOPs for 10+ implant geometries.

Modular Environmental Chambers: Quick-swap pods for simulated physiological (-20°C to +50°C) and corrosive environment testing.

Product Features

Electromagnetic Actuator: 5.000 N peak force capacity with programmable load ratios (R=0.1–10).

Triaxial Loading System: Simultaneous axial/torsional/shear loading (30 Nm max torque).

Dynamic Load Control: 0.1–30 Hz frequency range with programmable waveforms (sine, square, random, custom).

Thermal-Mechanical Chamber: ±0.3°C temperature stability with integrated humidity control (10–95% RH).

High-Speed Imaging Ready: Syncs with external cameras for full-field strain mapping (DIC optional upgrade).

Safety First: Triple-redundant emergency stop, overload clutches, and laser-based specimen breakage detection.

Technical Parameters

Parameter	Specification
Max. Dynamic Force	±5.000 N (10.000 N peak optional)
Frequency Range	0.1–30 Hz (0.01 Hz increments)
Load Ratio (R)	0.1–10 (adjustable)
Axial Displacement	±20 mm (0.1 μm resolution)
Torque Capacity	±30 Nm (0.01 Nm resolution)
Temperature Range	-20°C to +50°C (environmental chamber)
Humidity Control	10–95% RH (non-condensing)
Data Sampling Rate	100 kHz (synchronized across 16 channels)
Power Requirements	220V/110V ±10%, 50/60Hz, 2.500W
Dimensions (W×D×H)	1.600 × 1.100 × 2.100 mm
Weight	850 kg (including environmental chamber)
Noise Level	<68 dB (A-weighted)

Accessories

Femoral Condyle Test Fixture Kit:

Self-centering collet system (28–40 mm femoral component compatibility)

Laser-aligned loading anvils with diamond-like carbon (DLC) coating

Thermal-Mechanical Chamber:

20L capacity with rapid cooling/heating (15°C/min)

316L stainless steel interior with HEPA filtration

TestMaster Ultimate Software:

Automated F-N curve generation and fatigue limit calculation

21 CFR Part 11-compliant audit trail with blockchain timestamping

Remote monitoring via dedicated iOS/Android app

Operator Kit:

Calibrated torque wrench set (0.5–50 Nm)

Specimen alignment gauges (ASTM WK51649 compliant)

Calibration Bundle:

NIST-traceable force calibration weights

Temperature/humidity verification probe

Safety Kit:

Laser safety curtains

Acoustic enclosure with 30 dB noise reduction

Другие товары поставщика

	Intramedullary Nails/Bone Screw Static Torque Testing Machine	Standard YY/T 0591-2011: Chinese standard specifying torsion testing methods for intramedullary nails, including torque application, angular displ...
	Direcct flame impingement Tester	Introduction The testerisdesignedaccording to the BS476-12:1991.Method of test for ignitability of products by direct flame impingement.The accura...
	" Adiabatic Rate Calorimeter "	Product Description Battery Isothermal Calorimeter is a professional instrument developed based on the principle of power compensation isothermal ...
	Helmet Strap Tensile Tester	Purpose Apply a certain initial load to the helmet strap system for a certain period of time. Then, let a weight of a certain mass fall from a cert...
	Safety hat antistatic performance tester	Product Introduction: Safety hat anti-static performance tester according to the new national standard GB/T 2812-2006 "Safety hat test Method", GB...

Все товары поставщика

Похожие товары

	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	Продавец: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Продавец: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Продавец: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Продавец: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...