Luggage rod reciprocating fatigue testing machine
Product Introduction: Luggage rod reciprocating testing machine for luggage rod reciprocating fatigue test. In the test, the specimen will be stretched to test the gap generated by the tie rod, loosening, connecting rod failure, deformation, etc. Design criteria: QB/T 2919-2010 Theory： luggage trolley handle reciprocating fatigue testing machine -- Under certain pulling and pressing frequency, To check the reciprocating fatigue performance of the pull rod, rod structure of fastness and durability of the switch through the luggage lever lock with a pull rod is continuously pulling switch, reciprocating and pressing. Usage： Leather suitcase trolley reciprocating fatigue testing machine is used to test fatigue of the reciprocating rod for the luggage. During the test, the rod would be stretched and then test whether there will be backlash, loose, connecting problems and transformation of the rod. Technical parameters: Test travel 20——100cm, adjustable Maximum drawing speed 0——10 cm/sec, adjustable Maximum compression speed 0——10 cm/sec, adjustable Test times 0——999999 times automatic stop Test the power cylinder Sensing position Four-point sensing position The maximum height of the specimen is 100cm Auxiliary equipment case fixing clamp Use pressure 5——8kg/cm2 Machine size 80X90X180cm (WXDXH) The weight is about 120kg Use power supply AC220V, 50/60Hz, 5A include 1-6 specified parts: 1、Sample clamp holder: adjust the test size 2、pull rod holder 3、Rod movement device: do reciprocating motion ,and the speed and travel can be adjustable 4、support frame：the height is not less than 1500 mm, Install pulling, pressing travel guide 5、pull rod lock switch gear 6、counter：count the movement times
Другие товары поставщика
|
|
Friction and wear meter |
Standards
ASTM G99-04
ASTM G77-16
ISO 9352:1995
GB/T 12444-2006
GB/T 12607-2007
GB/T 1865-2009
Application field
Petrochemical: Used to ass... |
|
|
Helmet Wearing Height Testing Machine |
Main Purposes
Measure the wearing height of helmets to ensure the accuracy and safety of helmet - wearing positions.
Standard
EN 397 GB 2812
Ce... |
|
|
Electrochemical Corrosion and Wear Testing Machine |
Standard
ASTM G119: A standard for evaluating synergistic corrosion-wear performance, particularly for biomedical implants in simulated body fluid... |
|
|
Тестер складки бумаги |
Стандарты соответствия:
ISO 2758 и ISO 2759
ASTM D774 и D774M
TAPPI T 403 и TAPPI T 804
Принцип испытания:
Машина использует винт привода дв... |
|
|
Glow wire tester |
F242 Glow-wire tester, By simulating the thermal stress caused by heat source or ignition source such as hot component or overload resistor in a sh... |
Все товары поставщика
Похожие товары
