Pressure Transmission Flow Meter Test Instrument

• 

The Pressure Transmission and Flow Tester is widely used in multiple fields and is mainly used to test the pressure transmission and flow performance in fluid systems. The following is a detailed introduction to its main uses, compliance standards, and technical parameters:

Standards

The design and manufacture of the Pressure Transmission and Flow Tester need to comply with relevant industry standards and technical specifications to ensure the accuracy and reliability of test results. Common compliance standards include, but are not limited to: GB/T 19335 - 2022 General Technical Requirements for Disposable Blood - path Products, etc.

Main Uses

- Fluid System Performance Evaluation: The Pressure Transmission and Flow Tester can be used to evaluate the pressure transmission efficiency and flow characteristics of fluid systems under specific conditions, ensuring that the systems can meet the design and usage requirements.

- Product Quality Control: During the manufacturing process, this tester can be used for quality inspection of fluid system components (such as pipelines, valves, sensors, etc.) to ensure that product quality complies with relevant standards and regulations.

- Fault Diagnosis and Maintenance: By testing the pressure and flow data of fluid systems, it can help diagnose faults in the systems and provide a basis for the repair and replacement of faulty components.

- Research, Development and Optimization: In the design, research and development process of fluid systems, the tester can be used to test the effects of different design or improvement schemes, providing data support for optimizing system performance.

Technical Parameters

- Testing Range: - Pressure testing range: 0 - 10 KPa (standard configuration), which can be customized according to actual needs.

- Flow testing range: It depends on the specific model and configuration, usually covering a wide flow range.

- Accuracy: - Pressure testing accuracy: 0.5%FS (full - scale error) to ensure the accuracy of test results.

- Flow testing accuracy: It depends on the specific model and configuration, but also needs to meet high - accuracy requirements.

- Air Source Pressure and Interface: - Air source pressure: ≤0.7 MPa (the user provides the air source) to ensure the normal operation of the tester.

- Air source interface: Φ8 mm polyurethane tube or other standard interfaces, facilitating connection to air source equipment.

- Power Supply: - The voltage and frequency of the power supply vary according to the specific model. It usually supports a wide voltage range to adapt to the electrical standards of different regions. - External Dimensions and Weight:

- External dimensions: The main unit size is 300 mm(L)×410 mm(W)×150 mm(H) (the specific dimensions vary depending on the model), making it easy to place and operate.

- Weight: Moderate, easy to carry and move. - Other Functions: - Data recording and storage: It has the function of real - time data recording and storage, which is convenient for subsequent analysis and processing.

- Display and operation interface: It adopts a color touch - screen operation interface, supporting Chinese - English switching (or other languages). The interface is clear and easy to operate and use.

- Automatic calibration and fault diagnosis: Some models are equipped with an automatic calibration function to ensure the accuracy of test results. At the same time, they have a fault diagnosis function, which is convenient for timely detection and resolution of problems.

Другие товары поставщика

	Plastic Ball Indentation Hardness Measuring Device	Scope of application: It is used to measure the characteristics of the plastic drainage plate in the plane direction of the water flow under the s...
	Protective Clothing Resistance Tester	Related Standards GB/T 22042 - 2008 Clothing - Anti-static Performance - Test Method for Surface Resistivity GB/T 22043 - 2008 Clothing - Anti-st...
	Molten Metal Splash Resistance Test Equipment	Product Introduction： Projections of molten metal drops at a point on a vertical oriented test specimen and measurement of the number of the drops...
	STD Battery short-circuit tester丨STD Battery short-circuit chamber	Product Introduction Battery Short Circuit Tester is a device that can be applied to the external short circuit test process of lithium ion batter...
	High-precision thermal conductivity tester for silicone and ceramic materials	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application This tester is suitable for testing: Thin heat conductors and metals Solid e...

Похожие товары

	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	Продавец: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Продавец: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Продавец: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Продавец: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...