Protective Clothing Synthetic Blood Penetration Tester

• 

Standard

GB 19082-2003《Medical disposable protective clothing technology requires synthetic blood penetration test method》;

ASTM F1670 / F1670M - 17a Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood

working principle

Under constant pressure, the synthetic blood was tested on the protective clothing material, and the penetration of blood was synthesized on the visual inspection material.

Sample preparation

In the sample of each protective suit, 3 pieces (75*75) mm are randomly selected. When conducting the experiment on the composite or multi-layer materials, the edges should be sealed and the diameter shoud be kepted greater than 57mm for testing.

Instrument characteristics

1. The instrument adopts the air source which can provide (0.5---30 + 0.1)kPa pressure to continuously pressurize the sample, and is not subject to the space limitation of the test site;

2. The range of air pressure can be set freely and set range (0.5---30)kPa;

3. Color touch screen display, Chinese and English operation menu, user can freely choose the language operation;

4. The sample surface is made of imported special aluminum profiles, with light material, smooth surface and never rust;

5. The instrument adopts imported special aluminum drawing panel with metal buttons;

6. The instrument is equipped with a sample automatic clamping device without manual clamping;

7. The test tank is equipped with special fixed device to facilitate customer operation;

8. The test tank is made of high quality 316 stainless steel, with high transparent and high intensity protective cover.

9. Square metal block: open space is more than 50%; Under 30kPa, the bending is less than 5mm;

10. The precision of instrument time control is less than 0. 1 second;

11. High quality metal baking paint is used for the whole machine shell.

Technical Parameters

1. Pressure range and measurement accuracy: 0 ~ 0.04MPa (4mH2O) (31.4kg) accuracy: + 1kPa.

2. Sample size: 75mm * 75mm, under pressure area: 28.26 square centimeters.

3. Power supply: AC220V, 50Hz, 100W.

Другие товары поставщика

	Automatic freezing point pour point cold tester	Product Introduction: The automatic freezing point pouring point Freezing point tester is suitable for petroleum, biological, chemical and other f...
	Fabric Down-Proof Impact Tester	IntroductionThe first sample is made of bags which built a certain quality of the down. The sample bag is placed on the slope, and the impact needl...
	Fully Automatic Continuous Flow Reaction Calorimeter	Standards SN/T 3078.1. NY/T 3784. GB 51283 Product Features： 1. Using the coefficient calibration method and flow - regulation calorimetry, it c...
	Falling Sand Abrasion Tester	Standards GB811-2022. GB24429 GB/T 38305 GJB1564A GA/T44. GA293 GA294 GA295 GA296 ASTMD968 ASTMD333 ASTMD1395 ASTMD2205 Main applicati...
	Falling Sand Abrasion Tester	Applicable Standard JG/T 133-2000 ASTM D968-83 ASTMD333 ASTMD1395 ASTMD2205 Main Purposes It is mainly used to test the abrasion - resistanc...

Похожие товары

	FH-77 Dissolved hydrogen meter	Продавец: Коллирон электроникс лимитед	Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy...
	Xenon Arc Weather Ometer	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
	Xenotest | Light Fastness Tester Si220 (SunTest)	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
	Ozone Aging Chamber	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...
	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ...