Safety Helmet Roll-off device

• 

Purpose

Apply an initial load of a certain force to the rear of the helmet. Then, let a weight specified by the standard fall from a certain height so that the impact force is also applied to the helmet. In this way, the wearing stability performance of the helmet can be evaluated.

Test standard:

IS 4151 , ECE R22.05

Mass of initial load: 3 kg ± 0.1 kg

Mass of falling weight: 10 kg ± 0.01 kg

Lowering height: 0.5 meters ± 0.01 meters

Measuring method: manual

Electricity: 220V 50HZ

Test theory: vertical descent

Test steps:

1. previously to the ambient temperature and sanitary conditions for the conditions of the helmet, should be placed on the appropriate head shape and fixed in the appropriate head.

2. In the median vertical plane of the helmet, a device that guides and releases the fall with a total mass of 3 kg ± 0.1 kg is attached to the rear of the shell.

3. 10 kg ± 0.01 kg of falling mass is released and lowered from a height of 0.5 m ± 0.01 m. The guiding device should ensure that the impact velocity is not less than 95% of the theoretical velocity.

Другие товары поставщика

	Wear Track Profilometer	Applicable standards When the probe type material surface abrasion measuring instrument is tested, it usually needs to follow certain standards an...
	Ruhr conical joint multi-function tester	Product introduction 　　It is mainly used to test the leakage, gas, separation force, unscrewing torque, easy assembly, resistance to slip wire, ...
	Geomembrane thickness tester	Scope of application: Used to determine the thickness of smooth geomembrane and other plastic films under specified pressure and time. The sample ...
	Medical Face Mask Differential Pressure Tester	Medical face mask differential pressure tester also called mask breathility tester is to determine the breathability of medical face mask materials...
	Gas Hazardous Characteristics Tester	This tester is used to test the flammable concentration range of gases in air. It is suitable for the vast majority of pure flammable gases and mix...

Похожие товары

	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	Продавец: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Продавец: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Продавец: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Продавец: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...