Button Impact tester

• 

Standards:

ASTM D5171: Test Method for Abrasion Resistance of Inks and Coatings (referenced for impact-related durability assessments).

Application:

Button falling weight impact testeris used to determine the impact resistance of plastic sew-through flange buttons to a falling mass of 0.84kg (29.5oz), released from a height of 67mm (2.625 inches) or other heights as required. Evaluation Cracking, chipping and breakage, any of which constitutes damage. Test the remaining specimens.

Product Information:

With the equipment the impact resistance of plastic sew-through flange buttons can be determined that a falling mass of 0.84kg (29.5oz) is released from a height of 67mm (2.625inch) or other heights as required. Cracking, chipping or breakage constitute failure.

Features:

1. Ensure the vertical alignment of tension;

2. Fixed button edge without affecting its adhesion;

3. Consistent force of 10s continuously;

4. Elevate and fix the position of the test meter through the handle, easy to change samples

5. Horizontal hand wheel, designed to cooperate with ergonomic principles to make operators more comfortable;

6. Safety buckle design makes operation more secure and reliable;

7. The long machine frame can extend the test scope more widely;

8. The concealed spring is designed to greatly increase the pin tightening and ensure the test repeatability;

9. Can reduce the damage caused by slid leakage during test process;

10. Simple design and accurate test results.

Technical Parameter

Другие товары поставщика

	Fully Automatic Continuous Flow Reaction Calorimeter	Standards SN/T 3078.1. NY/T 3784. GB 51283 Product Features： 1. Using the coefficient calibration method and flow - regulation calorimetry, it c...
	Smoke Density Test Machine for Building Material, ASTM D2843	Introduction: In a fire, people are often smoke suffocated or unable to escape because of the invisible road, so in the prevention of fires,smoke ...
	Bearing Friction Torque Measuring Instrument	Standards GB/T 32562-2016 JJF1137-2024 Main Purposes The bearing friction torque tester is a precision instrument specifically designed for mea...
	Flip Phone Durability Tester	Product Introduction: Mobile clamshell testing machine is a special equipment for mobile clamshell fatigue test. Its structure design is reason...
	Carpet Hair Loss Measuring Instrument	Standard ASTM D5417(Standard Test Method for Quantifying Loss of Fiber from Carpets) ISO 10362(Textile Floor Coverings - Determination of Fiber...

Похожие товары

	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	Продавец: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Продавец: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Продавец: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Продавец: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...