Hydrogen Sulfide Corrosion Test Chamber
Referenced Standards:
Complies with national standard GB/T 978.9-88 "Corrosion Test of Metal and Non-Metal Coatings Under Condensing Sulfur Dioxide", international standard ISO 6988. QB/T 3831 "Color Change Resistance Test for Metal Plating and Chemical Treatment Layers", GB 2423.20-81 "Hydrogen Sulfide Test for Electrical Products", and other relevant global corrosion standards.
Model Specifications:
Device Name: Hydrogen Sulfide Corrosion Test Chamber, Gas Corrosion Test Chamber
Model Series: H2S-150. H2S-250. H2S-750. H2S-010
Key Performance Indicators:
1. Temperature control: ±0.5℃/±2℃ stability
2. Gas generation: Bottled gas supply system
3. Concentration regulation: 0.1~1% (v/v) precision control
4. Humidity control: 93%~98% RH with ±2% deviation
5. Heating system: Titanium alloy nickel-chromium heater with PID+SRR synchronization
6. Safety protection: Leak detection, short-circuit protection, over-temperature protection
7. Control system: Imported PID microcomputer controller with 0.1℃ resolution
8. Sample holders: 6 V-shaped corrosion-resistant racks + 12 O-shaped test rods
Environmental Requirements:
Ambient temperature: 25℃~35℃
Ambient humidity: ≤75% RH
Power supply: AC 220V/50Hz
Technical Parameters:
| Model | Inner Chamber Size (W×D×H) | Outer Dimensions (L×W×H) | Power Consumption (kW) | Temperature Range | Humidity Range | Gas Concentration |
|---|---|---|---|---|---|---|
| H2S-150 | 450×600×450mm | 680×1000×1050mm | 1.1 | 25℃~40℃ | 93%~98% RH | 25±5ppm |
| H2S-250 | 600×900×500mm | 850×1420×1120mm | 1.2 | 25℃~40℃ | 93%~98% RH | 25±5ppm |
| H2S-750 | 750×1100×500mm | 1000×1650×1320mm | 2.1 | 25℃~40℃ | 93%~98% RH | 25±5ppm |
| H2S-010 | 850×1300×550mm | 1150×1900×1370mm | 2.2 | 25℃~40℃ | 93%~98% RH | 25±5ppm |
Additional Notes:
1. All specifications measured under standard ambient conditions (25℃, no load)
2. Customized non-standard models available upon request
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Small Parts Tester | Test Procedure: Usage Methods and Interpretations Applicable standards: ASTM F963 EN 71-1 16 CFR Part 1501 ISO 8124-1 Product Advantages: Eff... |
 |
Carpet Static Load Tester | Instrument Description When furniture is moved, imprints are often left at the position of its feet. These imprints will disappear only when the c... |
 |
Helmet UV pretreatment box | Product Introduction: Helmet ultraviolet pretreatment box is used for helmet ultraviolet irradiation pretreatment, according to the new national s... |
 |
Single Cable Vertical Flame Tester | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a single insulated wire or cable is a bench scale te... |
 |
Metal Bone Screws Self - tapping Tester | Standard ISO 6475: Implants for surgery – Wear of total hip-joint prostheses ASTM F543: Standard Specification and Test Methods for Metalli... |
Похожие товары
 |
FH-77 Dissolved hydrogen meter | Продавец: Коллирон электроникс лимитед | Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy... |
 |
Xenon Arc Weather Ometer | Продавец: Standard Group (Hong Kong) Limited | Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ... |
 |
Xenotest | Light Fastness Tester Si220 (SunTest) | Продавец: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ... |
 |
Ozone Aging Chamber | Продавец: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum... |
 |
Plastic Smoke Density Tester F313 | Продавец: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ... |
