.

Fatigue Endurance Tester for Dental Implants

Standard

ISO 14801:2016: Specifies dynamic fatigue testing protocols for endosseous dental implants, including load ratios, frequency, and failure criteria.

YY/T 0521-2018 (China): Defines methodologies for evaluating the fatigue strength of dental implant-abutment complexes under cyclic loading.

Product Advantages

Electromagnetic Precision: Novel servo motor technology ensures backlash-free operation with 0.001 mm displacement resolution.

Biorelevant Simulation: Integrated 37°C water bath system replicates physiological conditions for in vitro corrosion testing.

Universal Fixturing: Adjustable angle clamps accommodate straight/angulated implants (0°–25° pre-set options).

High-Frequency Stability: 20 Hz operation with ±0.05% load accuracy across 2 million cycle tests.

Compact Design: Benchtop footprint (450 × 400 × 600 mm) suits laboratory environments.

Regulatory Compliance: Pre-loaded ISO 14801 protocols with automated data reporting for FDA/CE submissions.

Product Features

Electromagnetic Servo Actuator: 600 N dynamic load capacity with programmable R=0.1–10 ratios.

Dual Sensor System: 0.01 N resolution load cell + 0.001 mm LVDT displacement transducer.

Dynamic Load Control: 0.1–20 Hz frequency range with sine/square/random waveforms.

Thermal-Mechanical Bath: 37±0.5°C recirculating water system with anti-evaporation design.

High-Resolution Imaging: Built-in 2MP camera system for fretting corrosion analysis.

Safety Suite: Emergency stop, overload clutches, and water leak detection system.

Technical Parameters

ParameterSpecification
Max. Dynamic Load ±600 N (0.01 N resolution)
Frequency Range 0.1–20 Hz (0.01 Hz increments)
Load Ratio (R) 0.1–10 (adjustable)
Displacement Range ±5 mm (0.001 mm resolution)
Water Bath Temperature 37±0.5°C (PT1000 sensor)
Data Sampling Rate 10 kHz (synchronized across 8 channels)
Power Requirements 220V/110V ±10%, 50/60Hz, 1.200W
Dimensions (W×D×H) 450 × 400 × 600 mm
Weight 55 kg (net) / 65 kg (with water bath)
Noise Level <55 dB (A-weighted)

Accessories

Dental Implant Fixture Kit:

Adjustable angle clamps (0°–25° pre-set options)

Self-centering abutment adapters (3.0–6.5 mm compatibility)

Thermal-Mechanical Bath:

10L capacity with recirculating pump

Corrosion-resistant titanium interior

FatigueMaster Pro Software:

Automated S-N curve generation and fatigue limit calculation

21 CFR Part 11-compliant audit trail with blockchain timestamping

Remote monitoring via iOS/Android app

Operator Kit:

Calibrated torque wrench set (0.1–10 Nm)

Implant alignment jigs (ISO 14801 compliant)

Calibration Bundle:

NIST-traceable force calibration weights


Отправить запрос, связаться с поставщиком

Кому: Qinsun Instruments Co., LTD
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Strength Tester for Lead - end of Photovoltaic Modules
Strength Tester for Lead - end of Photovoltaic Modules Standard IEC 61215-2:2016: Terrestrial Photovoltaic (PV) Modules – Test Requirements for Electrical and Mechanical Components CE Certific...
Safety Helmet High Temperature Pre-Treatment Chamber
Safety Helmet High Temperature Pre-Treatment Chamber Main Purpose It is mainly used for the extremely high - temperature pre - treatment of safety helmets. Compliance Standard GB/T2812-2019 Techni...
Car seat foam performance tester
Car seat foam performance tester Applicable standards: GB/T 6670-2008"Determination of falling ball resilience of soft foam polymeric materials" : This standard specifies the test...
Photovoltaic module damp heat test chamber
Photovoltaic module damp heat test chamber Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval UL 1073: Standard for Safety for Enclosu...
 Konan Testing machine
Konan Testing machine Conforms to the UN Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria 11.5.1 Test 1(b): Kernan Test, GB/T 21578-200...
Все товары поставщика

Похожие товары

Custom Stainless Components for OEM Applications
Custom Stainless Components for OEM Applications Продавец: Yongjia County Yaokang Technology Co., Ltd. Our stainless steel float balls are designed for float valves, water tanks, and industrial liquid...
FH-77 Dissolved hydrogen meter
FH-77 Dissolved hydrogen meter Продавец: Коллирон электроникс лимитед Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy...
Xenon Arc Weather Ometer
Xenon Arc Weather Ometer Продавец: Standard Group (Hong Kong) Limited Get a quote: Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
Xenotest | Light Fastness Tester Si220 (SunTest)
Xenotest | Light Fastness Tester Si220 (SunTest) Продавец: Standard Group (Hong Kong) Limited Get a quote: Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
Ozone Aging Chamber
Ozone Aging Chamber Продавец: Standard Group (Hong Kong) Limited Get a quote: Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...