Coating Shear Strength Tester

Standard

YY/T 0856-2011 (China): Specifies mechanical testing protocols for metal angular fixators, including single-compression bending and bending fatigue tests.

ASTM F384-17 (International): Defines methodologies for evaluating the static and fatigue performance of orthopedic angular stabilization devices.

ISO 12177-2: Additional compliance for four-point bending fatigue testing of bone plates.

Product Advantages

Multi-Axial Testing: Combines single-compression bending and fatigue testing in one modular system.

High-Precision Actuation: Electromagnetic servo motor ensures ±0.05% force accuracy at 5Hz operation.

Anatomical Simulation: 4-point bending fixture replicates physiological stress patterns (0°–90° angle adjustment).

Biorelevant Environment: 37±1°C saline bath with protein skimmer for in vitro corrosion testing.

AI-Powered Analytics: Machine learning identifies creep-fatigue interactions in real-time.

Regulatory Compliance: Pre-loaded YY/T 0856/ASTM F384 protocols with automated reporting.

Product Features

Electromagnetic Servo Actuator: 10 kN axial/5 Nm torsional capacity with programmable load ratios (R=0.1–10).

4-Point Bending Fixture: Self-aligning anvils accommodate fixator lengths (50–200 mm) and angles (0°–90°).

Dynamic Load Control: 0.1–30 Hz frequency range with sine/square/random waveforms.

Thermal-Mechanical Chamber: 37±0.5°C recirculating saline bath with anti-evaporation design.

High-Resolution Imaging: Built-in 5MP camera system for crack propagation analysis.

Safety Suite: Emergency stop, overload clutches, and leak detection system.

Accessories

Angular Fixator Fixture Kit:

Self-centering clamps (50–200 mm fixator compatibility)

Anatomical angle adapters (0°–90° adjustment)

Thermal-Mechanical Bath:

20L capacity with recirculating pump

Corrosion-resistant titanium interior

AngleFix Pro Software:

Automated stiffness degradation tracking and fatigue limit calculation

21 CFR Part 11-compliant audit trail with blockchain timestamping

Remote monitoring via iOS/Android app

Operator Kit:

Calibrated torque wrench set (0.1–10 Nm)

Fixator alignment jigs (ASTM F384 compliant)

Calibration Bundle:

NIST-traceable force/torque calibration weights

Angular encoder verification tool

Safety Kit:

Leak detection system

Acoustic enclosure with 25 dB noise reduction

Technical Parameters

Parameter	Specification
Max. Bending Force	±10.000 N (0.01 N resolution)
Max. Torsional Moment	±5 Nm (0.001 Nm resolution)
Frequency Range	0.1–30 Hz (0.01 Hz increments)
Load Ratio (R)	0.1–10 (adjustable)
Bending Angle Range	0°–90° (0.1° resolution)
Saline Bath Temperature	37±0.5°C (PT1000 sensor)
Data Sampling Rate	10 kHz (synchronized across 8 channels)
Power Requirements	220V/110V ±10%, 50/60Hz, 1.800W
Dimensions (W×D×H)	600 × 500 × 800 mm
Weight	95 kg (net) / 110 kg (with bath)
Noise Level	<55 dB (A-weighted)

Другие товары поставщика

	Hexapod Tumbler test machine	Application Textile Industry: Assesses carpet pile integrity for residential, commercial, and automotive applications. Quality Control: Validat...
	Seal Strip Abrasion Tester	Seal Strip Abrasion Tester is designed to determine the resistance of car seal strip to abrasion. Test specimens are repeatedly rubbed against spec...
	Rubber low temperature brittleness testing machine	Product Introduction: Plastic low temperature embrittlement testing machine is to determine the temperature of rubber and plastic when the sample ...
	Particle Strength Test device	Standard ASTM D4179: Standard Test Method for Single-Pellet Pressure Resistance of Catalysts and Catalyst Carriers ASTM D6175: Standard Test Me...
	Safety hat antistatic performance tester	Product Introduction: Safety hat anti-static performance tester according to the new national standard GB/T 2812-2006 "Safety hat test Method", GB...

Все товары поставщика

Похожие товары

	FH-77 Dissolved hydrogen meter	Продавец: Коллирон электроникс лимитед	Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy...
	Xenon Arc Weather Ometer	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
	Xenotest | Light Fastness Tester Si220 (SunTest)	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
	Ozone Aging Chamber	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...
	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ...