Medical Face Mask Pressure Difference Measuring Device

• 

Medical face mask differential pressure tester also called mask breathility tester is to determine the breathability of medical face mask materials. The tester can measure the differential pressure (Delta P) required to draw air through a measured surface area at a constant air flow rate is used to measure the air exchange pressure of the medical face mask materials. By providing the suction air through the holding sample, the tester can measure the Delta P by differential pressure transducer. It is to determine the air permeability and using comfort of the materials for medical mask.

Standard:

YY 0469-2011

YY/T0969-2013

EN 14683:2014

Annex C

ASTM F2100

Features:

1. Adopt suction air source as the power source of the instrument, not limited by the space of the test site;

2. Medical Face Mask Air Exchange Pressure Difference Tester equipped with high-precision pressure difference sensor, digitally display the pressure difference on both sides of the sample;

3.The special sample holder ensures that the sample is firmly held.

Specifications:

Flow meter range: (0 ~ 10) L/min

Manometer range& accuracy: 0 ~ 1000 Pa, 1 Pa

The internal diameter of the top and bottom holders in contact with specimen: Φ25 mm

Test area: 4.9 cm?

Power: 220 V, 50 Hz, 200 W

Weight: 65 Kg

Другие товары поставщика

	Wear Track Profilometer	Applicable standards When the probe type material surface abrasion measuring instrument is tested, it usually needs to follow certain standards an...
	Steel wheel wear test device	Meet the standard: GB/T3810.7-2016 "Wear resistance test method for unglazed brick" ISO/DIS10545/6-94 "Unglazed brick resistance to deep wear tes...
	Leather Seam Fatigue Tester	Standards ISO 5402: Leather physical testing – Flex tester method for adhesion and strength analysis. SATRA TM55: Seam fatigue testing fo...
	Protective Clothing Synthetic Blood Penetration meter	Introduction It is applicable to the resistance of the protective clothing to the synthetic blood penetration under different levels of test pressu...
	Spectral Density Analyzer	Standard The SpectroDensitometer YD5000 complies with international standards includingISO 5-4.CIE No.15. andISO 13655. ensuring reliable and stan...

Похожие товары

	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	Продавец: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Продавец: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Продавец: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Продавец: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...