Contact Heat Resistance Evaluation Tester
Product Details
The contact heat resistance tester evaluates materials' ability to withstand high-temperature contact heat by measuring the time required for specimen temperature to rise 10°C under specified pressure and heating conditions. This critical time determination provides quantitative assessment for thermal protection material development and performance evaluation.
Compliance Standards
EN 702. EN 12477. EN 407. ISO 12127
Scope of Application
Suitable for testing thermal protection performance of firefighter suits, heat-resistant gloves, and related materials.
Technical Specifications
1. High-temperature heating element (Φ25.2mm) with:
a. Sensitive thermocouple sensor
b. Temperature settable from room temperature to 500°C
2. Insulated heating element coating to prevent heat dissipation interference
3. 49N contact force provided by weighted pressure plate
4. Alumina-anodized temperature probe (Φ25mm, 5mm) with ±0.1°C accuracy
5. Motorized sample holder system:
a. 5mm/s precise motion control
b. Contact heating body at controlled speed
6. One-touch testing with LED display showing:
a. Initial specimen temperature
b. Real-time temperature
c. Critical 10°C rise time (±0.1s resolution)
7. Dimensions: 800×50×550mm (W×D×H)
8. Power requirement: 230V 50Hz AC
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Bubble Leak meter | Main Uses Medical Device Packaging Inspection:The Gross Leak Tester can be used for the sealing performance testing of various medical device pack... |
 |
G612 national standard shoe wear testing machine | Product Introduction: The whole shoe wear testing machine is used to test the wear resistance of soles and sole pieces. The principle is to press ... |
 |
Electric bicycle chassis performance dynamometer | Meet the standard: EN 15194 ISO 4210 UL 2849 Product Introduction: Electric bicycles are complex systems involving mechanical, electrical, and... |
 |
Fiber crimp elastometer | Product Introduction: YG362C fiber crimp elasticity meter is used for crimp degree of 1-22dtex fiber. Crimp elasticity, crimp recovery rate index... |
 |
Model Coin-cell Swelling device | Standard ASTM E83: Standard Test Method for Verification of Linear Displacement Measuring Systems ISO 12417-1: Mechanical Testing of Metals &ndas... |
Похожие товары
 |
Plastic Smoke Density Tester F313 | Продавец: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Продавец: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Продавец: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Продавец: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Продавец: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
