Flame retardant paper and board burning tester

• 

Introduction：

The Flame Retardant Paper and Board Burning Tester is a critical instrument for evaluating the fire safety of paper and cardboard materials treated with flame retardants. This testing is crucial across various industries, including packaging, construction, and textiles, to ensure that these materials meet stringent fire safety standards and regulations, ultimately reducing the risk of fire hazards and property damage. The tester helps in quantifying the effectiveness of flame retardant treatments by measuring how these materials behave when exposed to a controlled flame source.

There are several standardized test methods employed to assess the flame retardant properties of paper and board. These methods often involve exposing samples to a direct flame under specific conditions, either in a vertical or horizontal orientation. In a vertical burning test, a paper sample is held vertically, and its bottom edge is ignited. The tester then measures parameters like the flame propagation speed, the duration of afterflame and afterglow, and the char length. Conversely, a horizontal burning test involves positioning the paper sample horizontally and applying a flame to one of its edges, followed by measurements of the flame spread rate and burning time. Specialized tests, like the Horizontal Flame Test (UL 44. 83), apply a flame to a horizontal sample within an enclosure for a specific duration, often with additional indicators like a paper flag to assess the extent of burning.

The standards for flame retardant testing of paper and board vary depending on the application and the region. However, some common standards include those set by organizations like UL (Underwriters Laboratories) and ASTM International. These standards specify the criteria for passing the tests, such as maximum afterflame time, maximum char length, and whether any flaming drips are produced. Compliance with these standards assures consumers and regulatory bodies that the materials have been adequately treated to inhibit or slow down combustion.

The importance of flame retardant paper and board testing cannot be overstated. Untreated paper and cardboard are highly flammable and can contribute significantly to the rapid spread of fire. By using flame retardant treated materials that have undergone rigorous testing, the risk of fire incidents can be substantially reduced. This is particularly important in applications like packaging for hazardous materials, construction where paper-based products might be used in walls or insulation, and in the textile industry for items like disposable garments. The ability of flame-retardant papers to not only resist burning but also potentially act as fire sensors by triggering alarms in early stages further underscores the significance of this testing.

Technical parameters:

1. Ambient temperature :-10℃——30℃

2. Relative humidity :{<}85%

3. Power supply voltage and power :220V 10% 50HZ power less than 100W

4. MCU control, digital display automatic timing

5. Manual ignition Bunsen burner on the style flame time 12s, accuracy is 0.01s

6. Afterflame, afterglow time: maximum 0-99M99S

7. The inner diameter of Bunsen burner is 10mm and 0.2mm

8. The Bunsen burner can be tilted in the range of 0-45° (8 gears per 5° gear)

9. Bunsen burner blue flame height :15mm-175mm can be adjusted, equipped with flame height scale

10. Automatic ignition time of Bunsen burner: arbitrary setting

11. Digital display continued flame, burning flame time

12. Gas source: liquefied propane purity {>}95%

13. Appearance size :670x300x800mm

14. Style size :210mmx70mm

15. Weight of the instrument :40kg

Другие товары поставщика

	Image test standard transmission light box meter	Standard CIE 15:2004: Adheres to colorimetry standards for spectral measurement. ISO 3664:2009: Compliant with viewing conditions for graphic art...
	Textile water evaporation rate tester	Standard: The design and operation of this tester are aligned with key international and national standards related to assessing the moisture mana...
	Safety Helmet Lateral Rigidity Tester	Standard GB 2812: Safety Helmets (China National Standard) Equivalent Compliance: ISO 6220-2 (Industrial Safety Helmets – Lateral Deformati...
	Cantilever Fabric Stiffness Tester	Application: Fabric Stiffness Tester, is a practical equipment to determine the bending height, flexural rigidity and bending modulus of fabrics. ...
	Car seat belt fixed point test bench	Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtures and headrests strength requirements and test me...

Похожие товары

	Custom Stainless Components for OEM Applications	Продавец: Yongjia County Yaokang Technology Co., Ltd.	Our stainless steel float balls are designed for float valves, water tanks, and industrial liquid...
	FH-77 Dissolved hydrogen meter	Продавец: Коллирон электроникс лимитед	Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy...
	Xenon Arc Weather Ometer	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
	Xenotest | Light Fastness Tester Si220 (SunTest)	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
	Ozone Aging Chamber	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...