ASTM A519 Alloy Pipes
Specification:
ASTM A519- specification covers for several grades of carbon and alloy steel mechanical tubing, either hot-finished or cold-finished. The steel used in the mechanical tubing may be cast in ingots or may be strand cast. When steel of different grades is sequentially strand cast, identification of the resultant transition material is required. The seamless tubing is a tubular product made without a welded seam. It is usually manufactured by hot working steel, and if necessary, by subsequently cold finishing the hot-worked tubular product to produce the desired shape, dimensions and properties. The tubes shall be furnished in the following shapes: round, square, rectangular and special sections. Heat analysis shall be made to determine the percentages of the elements specified. If secondary melting processes are used, the heat analysis shall be obtained from one remelted ingot or the product of one remelted ingot of each primary melt. The tubing shall be coated with a film of oil before shaping to retard rust when specified
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
EN10216 Alloy Pipes | for pressure purposes · EN 10216-1 Non-alloy steel tubes with specified room temperature properties · EN 10216-2 Non alloy and alloy... |
 |
AISI 4140 Steel Pipe | AISI 4140 is a chromium molybdenum alloy steel specification widely used in the oil and gas industry. Similar to grade AISI 4130 but with a slight... |
 |
GB Standard Alloy Pipes | GB/T8162 GB/T8163 GB3087 GB6479 GB9948 GB5310 GB/T17396 20G, 20MnG, 25MnG, 15MoG, 12Cr2MoG, 15CrMoG, 12Cr1MoVG, 12Cr2MoWVTiB, 10Cr9Mo1VNb Size (mm... |
 |
ASI 4130 Round BarI | AISI 4130 is a low alloy steel containing molybdenum and chromium as strengthening agents. The carbon content is nominally 0.30% and with this rel... |
 |
Round Bar AISI 4140 Steel Pipe | AISI 4140 is a chromium molybdenum specification widely used in the oil and gas industry. Similar to grade AISI 4130 but with a slightly higher ca... |
