Molybdenum Electrode
Molybdenum electrodemade by powder metallurgy technology with pure molybdenum powder has high melting point, high temperature strength and hardness, good thermal shock resistance, good electrical conductivity, thermal conductivity and corrosion resistance. Molybdenum also has a good process suitablility, easy to carry out pressure processing and mechanical processing. Molybdenum is resistant to high temperature, corrosion of molten glass, and the corrosion products do not pollute the glass, so it has been widely used in the glass melting furnace.
Molybdenum Electrode Types
MoZrO2 Electrode
The electrode may deform due to gravity and glass liquid erosion at high temperature. We can provide a special electrode enhanced scheme for this case. A small amount of ZrO2 adding to the molybdenum can greatly enhance the electrode sag resistance and creep resistance at high temperature.
Coated Electrode
A special kind of silicon material is coated on the surface of the molybdenum electrode, which can cut off the contact between the air and the electrode, thereby increasing the service life of the electrode in the oxidizing atmosphere.
Molybdenum Electrode Specification
The molybdenum electrode is suitable for all kinds of glass furnace except lead glass, and the highest temperature is 1600℃. We have molybdenum electrode water jacket, 5K alloy, impeller and other accessories for your choice.
Main specifications and performance indexes of molybdenum electrodes
|
Electrode type |
Specification(mm) |
Electrode strength(σb MPa) |
|
|
20℃ |
1400℃ |
||
|
Molybdenum plate electrode |
(3-10) × (80-250) × |
676 |
66 |
|
Molybdenum rod electrode |
(Φ30-Φ80) × (200-1500) |
696 |
83 |
Molybdenum Electrode Application
Glass furnaces are divided into flame heating furnaces and electric melting furnaces. Electric melting furnaces are mainly divided into all electric-melting furnaces, forehearth electric boosters and complex furnaces. With the further improvement of the national energy saving and environmental protection requirements, the electric melting furnace has began to replace the flame heating furnace.
Domestically, there are two major systems as follow for the molybdenum electrode electric melting furnace according to the categories of molten glassware: soda-lime glass and borosilicate glass. Various specifications of the plate and rod electrode can meet the requirements for various electric melting furnace. The electrode has the advantages of less investment, high energy saving and high yield, corrosion resistance of the glass liquid, uniform electric load and current density, uniform temperature in the furnace, stable operation, etc.
There are many titanium rod manufacturers, but we are one of the best choices for you.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Gr5 Titanium Tube | The 21st century is an era of sustainable development of the marine economy, and marine resources are an important sector of economic development. ... |
 |
Titanium Bolt | Titanium Bolts Wholesale Titanium bolts have the characteristics of low density, high specific strength, good corrosion resistance, low thermal co... |
 |
Molybdenum Rod | Grade: Mo1 Mola TZM Standard: GB/T4188-1984 Surface condition: Black, Alkali wash, Bright, polished. Molybdenum Rod Specification Chemica... |
 |
Molybdenum Sheet & Foil | In refractory metals, molybdenum has good thermal conductivity, electrical conductivity and low thermal expansion coefficient, has high strength un... |
 |
Titanium Basket | Titanium mesh basketis light in weight, has strong corrosion resistance, and has a layer of oxide film on its surface. Under normal electroplating ... |
Похожие товары
 |
3D printing spherical titanium carbide powder | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This batch of titanium carbide powder (TiC) has a purity of over 99.5%, with a particle size cont... |
 |
Titanium carbide hard alloy drive wheel - Specialized | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | The titanium carbide (TiC) guide wheel is fabricated via high-temperature powder metallurgy sinte... |
 |
Industrial guide wheels, titanium carbide wear-resistant alloy | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This carbonized titanium (TiC) guide wheel is formed by high-temperature sintering of 99.5% pure ... |
 |
Unfinished bar stock - heat treatable | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This high-purity titanium carbonitride (TiCN) round bar is fabricated via hot-pressing and sinter... |
 |
Steel-based titanium carbide hard alloy round bar | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This carbonitride round bar (TiC) is formed by hot-pressing and sintering 99.5% high-purity carbo... |
