Environmentally friendly chromium carbide powder
Chromium carbide powder is often irregular grayish-black particles with a particle size of 10-40μm, a purity of ≥98%, and a free carbon content of ≤0.5%. It features high hardness and excellent wear resistance, with a bulk density of 2.9-3.2g/cm³, and is suitable for thermal spraying and surfacing processes. It is widely used for surface strengthening of easily worn parts such as mine crusher liners and metallurgical roller tracks, effectively resisting material erosion and extending the service life of equipment. Chromium carbide powder has outstanding high-temperature oxidation resistance. Its oxidation rate is low below 900℃ in the air, and the formed oxide film can prevent further oxidation, making it suitable for use in high-temperature working conditions. When applied to the coating of gas turbine blades, it enables the blades to operate normally at high temperatures of 600-800℃ and extends the maintenance cycle. The sintering activity of the powder is high. After sintering with the metal binder phase at 1100-1300℃, high-density cemented carbide can be made, with a flexural strength of over 1500MPa. In the field of high-temperature bearings, this alloy bearing can withstand high temperatures and high loads, and its performance is superior to that of traditional bearing steel.
Другие товары поставщика
|
|
Adaptation of precision mechanical drives introduction guide rolls |
For the rolling mill, guide rollers (also called ring rollers, guide wheel) is an indispensable part of wires export in the wires rolling process, ... |
|
|
Sub-micron Chromium Carbide Powder |
Thermal spray powder material, grain growth inhibitor for sintering WC/Co hard metals and corrosion resistant components and etc...Chromium Carbide... |
|
|
Chromium carbide powder with particle size reaching submicron level |
Chromium carbide powder exhibits outstanding high-temperature oxidation resistance, with a low oxidation rate below 900°C in air. The oxide fil... |
|
|
Titanium carbide guide wheels - made of alloy, durable and hard. |
The guide wheel features precisely machined mounting holes, with a controlled shaft-to-bore clearance of 0.005–0.01 mm, thereby eliminating r... |
|
|
Industrial titanium carbide rods are easy to weld and process |
Compared with traditional high-speed steel bars, the cutting speed of hard alloy titanium carbide round bars can be increased by 3 to 5 times, whic... |
Все товары поставщика
Похожие товары
