Titanium carbide rods - Precision grinding processing
The length of this round bar can be customized according to specific requirements, ranging from 100 mm to 1000 mm. It is suitable for secondary processing operations such as precision grinding and wire cutting, enabling the fabrication of components with complex geometries. Although the initial cost is higher compared to conventional cemented carbide, a comprehensive evaluation of its extended service life and enhanced processing efficiency reveals a lower unit production cost. In the gear manufacturing industry, hobs fabricated from this material can achieve gear tooth surface accuracy of grade 6 or higher, meeting the stringent requirements of high-performance mechanical transmission systems. The manufacturing process of this round bar is highly controlled: from the purity of titanium carbide powder (≥99.5%) to the precise regulation of sintering temperature (approximately 1500 °C), each step critically influences the final product performance. The finished bars exhibit excellent dimensional stability, with a coefficient of thermal expansion of only 6×10⁻⁶/°C over a temperature range of -50 °C to 300 °C—significantly lower than that of typical metallic materials—ensuring consistent precision of cutting tools under varying environmental conditions. This material is widely employed as wear-resistant inserts in automotive molds, where it withstands prolonged high-pressure friction with minimal wear, thereby extending mold service life.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Titanium carbide rods with excellent impact resistance | titanium carbide round bars can be customised with different properties by adjusting the titanium carbide content (usually 70-90%) and binder rat... |
 |
Low-pollution production of chromium carbide powder | Chromium carbide powder is often irregular grayish-black particles with a particle size of 10-40μm, a purity of ≥98%, and a free carbon conte... |
 |
Wholesale Chromium Carbide Powder | The powder has good chemical stability, does not react with water and dilute acid at room temperature, and only dissolves slowly in concentrated ... |
 |
Nano grade titanium carbide alloy round bar | 该圆棒的生产工艺极其严谨，从碳化钛粉末纯度的控制（纯度≥99.5%）到烧结温度的精确调控（约1500℃），每一个环节都影响着最终的性能。成品尺寸稳定性极佳，在-50℃至300℃的温度变化下，热膨胀系数仅为6×10-⁶/℃，远低于金属材料，确保了精密工具在不同环境下的精度。它广... |
 |
Chromium carbide powder with both high toughness and corrosion resistance | Chromium carbide powder can be compounded with other wear-resistant material powders (such as tungsten carbide and molybdenum disulfide) to form a ... |
Похожие товары
 |
3D printing spherical titanium carbide powder | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This batch of titanium carbide powder (TiC) has a purity of over 99.5%, with a particle size cont... |
 |
Titanium carbide hard alloy drive wheel - Specialized | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | The titanium carbide (TiC) guide wheel is fabricated via high-temperature powder metallurgy sinte... |
 |
Industrial guide wheels, titanium carbide wear-resistant alloy | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This carbonized titanium (TiC) guide wheel is formed by high-temperature sintering of 99.5% pure ... |
 |
Unfinished bar stock - heat treatable | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This high-purity titanium carbonitride (TiCN) round bar is fabricated via hot-pressing and sinter... |
 |
Steel-based titanium carbide hard alloy round bar | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This carbonitride round bar (TiC) is formed by hot-pressing and sintering 99.5% high-purity carbo... |
