Titanium carbide guide wheel - high precision
The titanium carbide-based cemented carbide guide wheel exhibits exceptional thermal shock resistance, maintaining structural integrity even under rapid temperature fluctuations from room temperature to 300°C and back. This characteristic makes it highly suitable for intermittent industrial operations. The guide wheels are available in a wide range of dimensions, with diameters spanning 50 mm to 500 mm and widths ranging from 10 mm to 100 mm, enabling compatibility with various wire drawing and rolling equipment. In optical fiber and cable manufacturing, these guide wheels ensure precise fiber alignment, maintaining signal attenuation below 0.2 dB/km and thereby guaranteeing high-quality communication performance. As critical guiding components in wire and tube production, titanium carbide-cobalt composite guide wheels are fabricated through powder metallurgy processes using high-purity titanium carbide reinforced with a cobalt binder phase. These components achieve a surface hardness of up to HRC 88 and demonstrate wear resistance exceeding 50 times that of conventional steel guide wheels. Roundness accuracy is maintained within 0.002 mm, ensuring stable wire movement during high-speed drawing processes (up to 100 m/s) without vibration or lateral deviation. In stainless steel wire production, the application of these guide wheels reduces surface roughness from Ra 1.6 μm to Ra 0.4 μm, significantly enhancing product surface quality.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Titanium carbide hard alloy rods are highly hard and wear-resistant | 与传统高速钢棒材相比，硬质合金碳化钛圆棒的切削速度可提高3至5倍，可显著缩短批量生产中的加工时间。其微观组织均匀，晶粒尺寸可控制在1μm以下，确保棒材各部位性能一致，避免因材质不均导致的刀具失效。在模具行业，用其制成的冷冲压模具镶块，其使用寿命是钢制镶块的50至100倍，可显著降低更换频... |
 |
Titanium carbide powder for automated forming | This powder has excellent electrical and thermal conductivity, with an electrical conductivity of 3×10⁴S/m and a thermal conductivity of 35W/... |
 |
Customized titanium carbide hard alloy guide wheels | The surface of the guide wheel can be specially treated as required. For instance, after being sprayed with a diamond coating, its wear resistance ... |
 |
Industrial-specific titanium carbide guide wheels | 该导轮可根据线材或管材的具体尺寸和要求定制V型、U型、半圆形等各种槽型，满足多样化的生产需求。经过精密抛光处理，表面粗糙度可低至Ra 0.01 μm，显著减少摩擦对线材的损伤，使金属线材的抗拉强度提高10%以上。在汽车刹车线制造中，该导轮提供的稳定导向可确保均匀的张力分布，最大限度地降低... |
 |
Chromium carbide powder for sintering | The powder has a high hardness, with a microhardness of up to 2200HV. The hardness of the wear-resistant coating prepared from it can reach over HR... |
