Thermal spray titanium carbide powder
Titanium carbide powder has excellent chemical stability. It is insoluble in common acids and bases such as water, hydrochloric acid and sulfuric acid, and only corrodes slowly in hydrofluoric acid and hot concentrated sulfuric acid. It is suitable as a raw material for making corrosion-resistant coatings. By spraying it onto the metal surface through the thermal spraying process, a wear-resistant coating with a thickness of 50-200μm can be formed, which can extend the service life of the parts by 5-10 times. The oxygen content of the powder is less than 0.1%, which can reduce the oxidation reaction during the sintering process and ensure the mechanical properties of the product. In oil drilling equipment, the coated drill bits prepared with this powder can withstand the high temperature, high pressure and corrosive environment underground. With the development of the new energy industry, titanium carbide powder is also applied in lithium-ion batteries. When used as an anode material, its theoretical capacity reaches 350mAh/g and its cycle life exceeds 1,000 times. After the surface of the powder is coated with a layer of carbon, its conductivity is further enhanced, and the charging and discharging efficiency of the battery is increased to over 95%. In the field of energy storage, it provides a new direction for the research and development of high-performance batteries and promotes the progress of new energy technologies.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Low-impurity titanium carbide powder | Titanium carbide powder has excellent oxidation resistance. It is not prone to oxidation in the air below 600℃, and the oxidation rate at 800℃ is o... |
 |
Wide-temperature-range titanium carbide guide wheel | Hard alloy titanium carbide guide wheels exhibit excellent impact resistance. In cases where the wire is suddenly tensioned or broken, these guide ... |
 |
Reduce sintering shrinkage rate of titanium carbide powder | Titanium carbide powder has excellent oxidation resistance. It is not prone to oxidation in the air below 600℃, and the oxidation rate at 800℃ is o... |
 |
Chromium carbide powder that extends the service life of mechanical parts by more than 50% | The main methods for preparing this powder include the electric arc furnace method and the carbothermal reduction method. Among them, the powder pr... |
 |
Titanium carbide rods by vacuum sintering process | Titanium carbide alloy round bar is a high-performance material made of titanium carbide (TiC) as a base, by adding metal or ceramic reinforcing ph... |
Похожие товары
 |
3D printing spherical titanium carbide powder | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This batch of titanium carbide powder (TiC) has a purity of over 99.5%, with a particle size cont... |
 |
Titanium carbide hard alloy drive wheel - Specialized | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | The titanium carbide (TiC) guide wheel is fabricated via high-temperature powder metallurgy sinte... |
 |
Industrial guide wheels, titanium carbide wear-resistant alloy | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This carbonized titanium (TiC) guide wheel is formed by high-temperature sintering of 99.5% pure ... |
 |
Unfinished bar stock - heat treatable | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This high-purity titanium carbonitride (TiCN) round bar is fabricated via hot-pressing and sinter... |
 |
Steel-based titanium carbide hard alloy round bar | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This carbonitride round bar (TiC) is formed by hot-pressing and sintering 99.5% high-purity carbo... |
