High hardness and low deformation guide rollers

• 
• 
• 
• 
• 

For the rolling mill, guide rollers (also called ring rollers, guide wheel) is an indispensable part of wires export in the wires rolling process, it must be accorded with the requirements of high rigidity, good wear resistance (the service life is matched with the high-quality bearing), good thermal conductivity, a certain of red hardness, especially the high speed wires rolling (rolling speed is among 80-120m/s). In the current market, most of the guide wheels are manufactured by steel materials (especially in the domestic market), which have the weak wear resistance, short service life and high frequency replacement, so the scale benefit of wire materials is restricted. however, steel-bonded cemented carbide has the obvious strengths on this aspect. Lighter than Tungsten carbide roller by 55%, Lighter than tool steel than 20%, so the guide roller accelerates from standstill to 35,000 rpm, without damaging the bearing.Very low coefficient of friction and self-lubricating properties, so the working portion of the guide roller is less worn, and the production can be greatly increasedThe coefficient of thermal expansion is close to that of the bearing steel. When the quenching is hot, the bearing will not get stuck. The thermal expansion coefficients of titanium carbide cemented carbide and tungsten carbide hard alloy are very different from those of steel. Therefore, the steel bonded carbide guide roller is more advantageous for bearing anti-seize ability than the two cemented carbide guide rolls.The micro structure is titanium carbide and high chromium tool steel, which has good thermal fatigue resistance.Anti-oxidation, less magnetic, non-stick steel.Annealing hardness is only HRC45-48, easy to process, after quenching, only a little fine grinding can be processed into finished products, the processing cost is low, so the price is also low. this is also one of the main reasons why titanium carbide guide rolls are superior to tungsten carbide guide rollers.Hardness HRC62-67, good wear resistance. the service life is 8-10 times that of high speed steel.Absolutely dense, the pores are almost zero, so it will not break when used and can be reused.Compared with similar foreign products, the price of Miller MT10 is lower, which greatly saves the production cost of customers.

Другие товары поставщика

	High toughness steel-bonded hard alloy rods	This carbonitride round rod (TiC) is formed by hot-pressing and sintering 99.5% high-purity carbonitride powder. Its diameter ranges from φ5 to...
	Impact resistant tantinium carbide round rods	Titanium carbide cermet rods (TiC rods) belong to the group of steel-jointed cemented carbides, which are composites of steel as the bonding phase ...
	Highly wear-resistant titanium carbide hard alloy drum	The installation holes of the guide wheel have high precision and the clearance between it and the shaft can be controlled within 0.005 - 0.01mm, e...
	ISO certified carbide guide wheel guide roller	Guide roll (guide wheel) is the steel field bar, wire rod rolling equipment on the main consumption of spare parts, in the rolling process, to ensu...
	Industrial titanium carbide rods for precision molds	Compared with traditional high-speed steel bars, the cutting speed of hard alloy titanium carbide round bars can be increased by 3 to 5 times, whic...

Похожие товары

	Aluminium Diamond Tread Plate	Продавец: Chongqing Exceed Metal Co., Ltd.	Пункт Алюминиевая рифленая пластина с алмазным рисунком Сплав 1100, 1050, 1060, 3003...
	Aluminium Foil	Продавец: Chongqing Exceed Metal Co., Ltd.	Сплав 1100, 1145, 1235, 3003, 8011, 8079 Темперамент HO, H18, H22, H24, H26 Тол...
	Aluminum Ba	Продавец: Chongqing Exceed Metal Co., Ltd.	Сплав 2024, 4047, 5052, 6061, 6063, 6082, 7075 Темперамент O-H112/T3-T8/T351-T851 ...
	Corrugated Aluminum Sheet	Продавец: Chongqing Exceed Metal Co., Ltd.	Сплав 1100, 1050, 1060, 1200, 3003, 3004, 3104, 3005, 3105 Темперамент HO, H12, H14,...
	Brushed Aluminium Sheet	Продавец: Chongqing Exceed Metal Co., Ltd.	Сплав 1050, 1100, 3003, 5052 Темперамент H14, H16, H18, H18, H24, H32, H34 Толщ...