Titanium carbide powder suitable for surface strengthening treatment

• 
• 
• 
• 

Titanium carbide powder can be mixed with other carbide powders (such as tungsten carbide and vanadium carbide) to form multi-component composite powders and customize materials with different properties. For instance, after adding 10% tungsten carbide powder, the flexural strength of the sintered body can be increased by 15%, making it suitable for manufacturing parts that bear impact loads. There are various methods for preparing powders, including carbothermal reduction and vapor deposition. Among them, the powder produced by carbothermal reduction has a relatively low cost and is suitable for large-scale application. In the mold industry, molds made of multi-component composite powders are not only wear-resistant but also impact-resistant, and have a wider range of applications. Titanium carbide powder has excellent chemical stability. It is insoluble in common acids and bases such as water, hydrochloric acid and sulfuric acid, and only corrodes slowly in hydrofluoric acid and hot concentrated sulfuric acid. It is suitable as a raw material for making corrosion-resistant coatings. By spraying it onto the metal surface through the thermal spraying process, a wear-resistant coating with a thickness of 50-200μm can be formed, which can extend the service life of the parts by 5-10 times. The oxygen content of the powder is less than 0.1%, which can reduce the oxidation reaction during the sintering process and ensure the mechanical properties of the product. In oil drilling equipment, the coated drill bits prepared with this powder can withstand the high temperature, high pressure and corrosive environment underground.

Другие товары поставщика

	Impact-resistant and scratch-resistant introductory guide rollers	For the rolling mill, guide rollers (also called ring rollers, guide wheel) is an indispensable part of wires export in the wires rolling process, ...
	Sintered reactive high titanium carbide powder	Titanium Carbide powder is a grey-black high hardness ultra-fine powder with the chemical formula of TiC, which has both metal and ceramic properti...
	Wear-resistant alloy chromium carbide powder	Chromium carbide powder is silver grey in colour and is an important metal-ceramic material with the chemical formula Cr₃C₂. It has high hardness...
	For the manufacturing of high-density titanium carbide rod molds	The anti-adhesion performance of titanium carbide round rods made of hard alloy is outstanding. When processing sticky materials such as aluminum a...
	Titanium carbide powder that enhances wear resistance by five times	Titanium carbide powder has excellent oxidation resistance. It is not prone to oxidation in the air below 600℃, and the oxidation rate at 800℃ is o...

Похожие товары

	Aluminium Diamond Tread Plate	Продавец: Chongqing Exceed Metal Co., Ltd.	Пункт Алюминиевая рифленая пластина с алмазным рисунком Сплав 1100, 1050, 1060, 3003...
	Aluminium Foil	Продавец: Chongqing Exceed Metal Co., Ltd.	Сплав 1100, 1145, 1235, 3003, 8011, 8079 Темперамент HO, H18, H22, H24, H26 Тол...
	Aluminum Ba	Продавец: Chongqing Exceed Metal Co., Ltd.	Сплав 2024, 4047, 5052, 6061, 6063, 6082, 7075 Темперамент O-H112/T3-T8/T351-T851 ...
	Corrugated Aluminum Sheet	Продавец: Chongqing Exceed Metal Co., Ltd.	Сплав 1100, 1050, 1060, 1200, 3003, 3004, 3104, 3005, 3105 Темперамент HO, H12, H14,...
	Brushed Aluminium Sheet	Продавец: Chongqing Exceed Metal Co., Ltd.	Сплав 1050, 1100, 3003, 5052 Темперамент H14, H16, H18, H18, H24, H32, H34 Толщ...