Application of Wire Rope Isolator for Vibration Damping in Vibration and Shock Isolation

• 
• 

With the deepening of isolation research and the development of isolation technology, nonlinear isolators suitable for various occasions have emerged. Laminated springs for the automotive industry are widely used in China. The principle is to use the dry friction between the steel plates to reduce the vibration and impact caused by the unevenness of the road. There are metal conical coil springs for the civil industry, as well as air springs.

During the entire deformation process of the wire rope shock mounts, sliding friction will occur between each wire rope, which consumes a large amount of energy and has a high equivalent damping ratio. Moreover, the wire rope anti vibration mounts exhibit nonlinear softening characteristics in a large deformation range, the stiffness decreases as the deformation increases, and the vibration isolation rate increases. Therefore, the good broadband isolation performance of the wire rope isolator for vibration damping is especially suitable for the application of vibration and shock environment isolation.

The wire rope shock mounts have only been developed in the last 30 years. Compared with the above-mentioned isolators, it has four distinct advantages:

① Nonlinear soft characteristics;

② Multi-directional isolation, high damping ratio;

③ Corrosion, high and low temperature resistance;

④ Compact structure and light weight.

At present, the common wire rope anti vibration mounts have several types of spiral, arch and ring. But in either case, they are made of stainless steel wire rope wound or bent. Their common advantage is the three-way protection of the equipment, reliable operation in high temperature and harsh environments, wide load range, unlimited storage period and service life. In terms of impact resistance, it can achieve maximum impact attenuation in a minimum space, and its vertical allowable deformation can reach 40~60% of the height of the vibration isolator. In foreign countries, they are used in the transportation of some equipment to replace the impact-resistant packaging of raw plastics and rubber. Rocket and missile transport vehicles also use it. In terms of ships, it passed the tests of light impact machines, heavy impact machines and floating impact platforms to meet the requirements of MIL-S-901 and MIL-STD-167. The wire rope isolator has excellent durability and fatigue. A vibration isolator with a diameter of 2.4 mm has been tested for up to 150 hours and seven million tests at 13 Hz and ±1.5 mm amplitude. The result is safe and sound.

For a 1.5 mm wire rope isolators dampingwith a 1.5 mm diameter, a sweep vibration test up to 10KHZ was performed, and the vibration isolation effect was 95%. This proves that the wire rope isolator for vibration damping can isolate small amplitude and structural noise. Wire rope anti vibration mounts are widely used in vibration and shock isolation of instruments, instruments, control boxes, etc., and some original rubber vibration isolators have been replaced by wire rope shock mounts.

Hoan has high-quality wire rope isolators damping for sale, contact us now.

Marine Wire Rope Vibration Mounts

wire rope isolator mountsare comprised of stainless steel stranded cable threaded through aluminum retaining bars that are mounted for effective shock and vibration isolation.

With the corrosion resistant, all-metal construction, the GRY marine shipbuilding wire rope vibrationmounts are environmentally stable, high-performance shock and vibration isolators that are unaffected by temperature extremes, chemicals, oils, ozone, and abrasives.

Другие товары поставщика

	Precision Instruments & Embedded Electronics PC Video Surveillance Used Shock Protection JMZ-T Rubbe	Precision Instruments & Embedded Electronics PC Video Surveillance Used Shock Protection JMZ-T Rubbe The JMZ-T seriesvibration-damping sandwich...
	JMZ-1-3.0A Rubber & Metal Anti Vibration Isolator Mounts	With the rapid development of modern industrial engineering, the various industrial anti vibration mounts, equipment isolation mountsand rubber vib...
	Military Wire Rope Vibration Isolator	This defense vibration isolators / wire isolator are now widely used in the field of military vehicles, armored cars, missile, launcher, highway tr...
	GRY-10A Stainless Steel Camera Vibration Isolator for UAV/Camera/Gimbal Shock Absorption	The GRY-10A marine shipbuilding vibration mount is made by the 30 loops 1.5mm diameter wire rope winded in the two mounting bars. The max static lo...
	JGX-1278 Wire Rope Elastomeric Vibration Isolators/Mounts For Multi Application	JGX-1278 multi-application elastomeric isolation mounts/wire rope isolator is the 8 loops 12.7mm diameter model with max static load from 122kg to ...

Похожие товары

	Порошковая проволока	Продавец: Henan Frontsteel Silicon Industry Co., Ltd.	Технические характеристики： Порошковая проволока SiCa/ CaFe/ SiCaBa/ CФорма:Использование: Произв...
	PVC Dense Wire	Продавец: Shijiazhuang Sairui Metal Product Co., Ltd	Small coiled wire, small coiled iron wire Small coiled wire Finely arranged wire Name: Garde...
	Galvanized Stranded Wire	Продавец: Shijiazhuang Sairui Metal Product Co., Ltd	Product Description Plunged wire: Plunged wire can be called plied binding wire, , which is ma...
	Black Annealed Iron Wire	Продавец: Shijiazhuang Sairui Metal Product Co., Ltd	Product Description Process:Roll the hot metal billet into a 6.5mm thick steel bar, that is, a...
	Galvanized Wire	Продавец: Shijiazhuang Sairui Metal Product Co., Ltd	Product Description The galvanizing process is to coat the ordinary iron wire we see daily wit...