.

JMZ-1-3.0A Rubber & Metal Anti Vibration Isolator Mounts

With the rapid development of modern industrial engineering, the various industrial anti vibration mounts, equipment isolation mountsand rubber vibration isolator mountsare all developing to high speed, high efficiency, high precision, and automation. However, with the increase of equipment's power and speed, the intensity of the vibration source in engineering practice is increasing constantly, the harm is also obvious because of vibration and noise. Vibration does the great harm to operators, precision instruments, machinery equipment and architectural structure, at the same time, vibration and the noise is also bad for people's living condition and physical and mental health. Therefore, harm from vibration and noise is drawing more and more attention from researchers from various countries.

JMZ-1-3.0A rubber mounting feetbelongs to the JMZ-1 series. It adopts the structure of double spring and special friction plate. It has good impact resistance and a 3 kg maximum rated load. It can rubber metal isolatorsin any direction. This type of rubber isolation mounting feet has a wide operating frequency range and can be used in harsh environments such as high and low temperature and chemical pollution. It has good performances such as anti-humidity, anti-salt fog, high and low-temperature resistance, mold resistance and long service life.

Vibration and noise are harmful in most cases, vibration hazards are regarded as one of the seven environmental hazards. The hazards of vibration and noise can be divided into the following aspects:

When vibration is over certain strength, it will do harm to human bodies. People will have insomnia, lumbago, backache, fatigue, impotence, headache, dizzy, drowsy, gastro-intestinal, low appetite and weak attention id they are under the environment of large vibration and noise for a long time, it is also easy to make mistakes and technical error, what's worse, it will make people's senses blunt and cause physical illness.

Vibration brings unsafe factors to buildings when vibration is acting on buildings, that is to say, mechanical energy is acting on buildings, it will create deformation. Vibration makes bigger deformation and setting of the ground. When vibration frequency and building structure frequency is the same or similar, the harm will be more serious, it even makes buildings fall down. Vibration will cause uneven sedimentation and damage plant and equipment if the basic geological condition of equipment is bad.

At present, machinery equipment and power is larger and larger and its variety is more and more diversified, after the vibration from machinery equipment is transferred to basics, floors, walls and other structure, vibration will transfer to other room by elastic waves and create vibration between neighboring air, so the vibration of objects will be spread to everywhere in the form of sound wave, that is what we called noise. Ferroconcrete and metal are the good material for isolating air noise, but it makes no differences for solid state noise, sometimes a pump can break the peace of the whole building.

Vibration breaks the accuracy, reliability and sensitivity. If the instruments and apparatus are near the strong vibration source, vibration will have the different influence on them. Influence on the normal operation of instruments and influence on the accuracy of the scale of apparatus reduces the precision of measurement, what's worse, it will make instruments out of order, especially for electric instruments.

Therefore, how to decrease the harm of vibration and noise efficiently is a very important issue for the industrial development all over the world, vibration control is the most direct way to decrease the harm of vibration and noise in engineering practice, so the research of vibration control is necessary for controlling vibration and noise.

Marine Wire Rope Vibration Mounts

Wire rope shock mountare comprised of stainless steel stranded cable threaded through aluminum retaining bars that are mounted for effective shock and vibration isolation.

With the corrosion resistant, all-metal construction, the GRY marine shipbuilding vibration mounts are environmentally stable, high-performance shock and vibration isolators that are unaffected by temperature extremes, chemicals, oils, ozone, and abrasives.



Отправить запрос, связаться с поставщиком

Кому: Xi\'an Hoan Microwave Co., ltd
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Multi-Application Wire Rope Vibration Isolator
Multi-Application Wire Rope Vibration Isolator Hoan multi-application areused widely in the field of RC car, camera drone, UAV camera, video, military vehicles, highway transportation, marine, s...
JMZ-1-3.0A Rubber & Metal Anti Vibration Isolator Mounts
JMZ-1-3.0A Rubber & Metal Anti Vibration Isolator Mounts With the rapid development of modern industrial engineering, the various manufacturing machine, transportation machine are all developing to high s...
Anti-shock Rubber
Anti-shock Rubber Rubber is characterized by high elasticity and high viscosity. The elasticity of rubber is produced by changes in the conformation of its curly mol...
JMZ-1-2.0B Rubber & Metal Anti Vibration Mount
JMZ-1-2.0B Rubber & Metal Anti Vibration Mount Rubber vibration isolator is the most widely used vibration isolator, it is widely used in various fields like the vehicle, shipping, automobile, p...
JMZ-T1 Industrial Anti Vibration Isolator Dampers & Mounts
JMZ-T1 Industrial Anti Vibration Isolator Dampers & Mounts JMZ-T1 anti vibration mount has the static load from 0.45kg to 1.4kg, which has small size than any other kind vibration mounts. For its unique sm...
Все товары поставщика

Похожие товары

Anti Vibration Mount
Anti Vibration Mount Продавец: Xi\'an Hoan Microwave Co., ltd From the 1970s, the technology of aerospace anti vibration mountsis applied to the project constr...
JMZ-1-2.0B Rubber & Metal Anti Vibration Mount
JMZ-1-2.0B Rubber & Metal Anti Vibration Mount Продавец: Xi\'an Hoan Microwave Co., ltd Rubber vibration isolator is the most widely used vibration isolator, it is widely used in variou...
JMZ-1-3.0A Rubber & Metal Anti Vibration Isolator Mounts
JMZ-1-3.0A Rubber & Metal Anti Vibration Isolator Mounts Продавец: Xi\'an Hoan Microwave Co., ltd With the rapid development of modern industrial engineering, the various industrial anti vibratio...
JMZ-T1 Industrial Anti Vibration Isolator Dampers & Mounts
JMZ-T1 Industrial Anti Vibration Isolator Dampers & Mounts Продавец: Xi\'an Hoan Microwave Co., ltd JMZ-T1 anti vibration mount has the static load from 0.45kg to 1.4kg, which has small size than a...
JMZ-T Rubber Vibration Damping Sandwich Mounts
JMZ-T Rubber Vibration Damping Sandwich Mounts Продавец: Xi\'an Hoan Microwave Co., ltd The JMZ-T series rubber sandwich mountsis the new designed model, which is designed especially fo...