Welding Neck Flanges
Neck flange diameter range: DN10~DN600 Specification: Class 150#, 300#, 400#, 600#, 900#, 1500#, 2500# Size As per customers requirement Face type FF, RF, LJ, RTJ, TG Pressure 150bls to 2500bls...
Neck flange is a steel pipe flange with neck welding. It is a flange that connects steel pipe, pipe fittings and so on through fillet weld to equipment or pipe.
Neck flange diameter range: DN10~DN600.
Specification: Class 150#, 300#, 400#, 600#, 900#, 1500#, 2500#
Size As per customers requirement
Face type FF, RF, LJ, RTJ, TG.
Pressure 150bls to 2500bls
Painting Yellow varnish, black paint. Rust oil and Zn
Packing: Plywooden cases and pallets
Standard: ANSI, JIS, BS, DIN, UNI, EN, GB, AWWA, API, MSS
Type: Welding neck flange, Socket welding flange, slip-on flange, Thread flange, Lap joint flange, Blind flange, 8-Blind flanges, Orifice flange
function
Neck flange is a flange that connects steel pipe, fittings, etc into flanges through fillet welds to equipment or pipes, just like plate flanges.
Sealing form
The sealing surfaces of the flange with neck are:Protruded (RF), concave (FM), convex (M), tenon (T), groove (G), full plane (FF).
Advantages: neck flange is also a flange, because of a short neck, thus improving the strength of the flange and the strength of the flange. So it can be used in higher pressure pipes.
Disadvantages: higher cost than plate flange, because of its shape characteristics easier to bump in transit.
The difference between flange with neck butt welding and flange with neck
1. The weld form is different: the weld form between the flange and the pipe is fillet weld, but the weld form between the flange and the pipe with neck butt welding is the circumferential weld;
2. the material is different: the material of the flange with neck is machined by the ordinary steel plate which meets the requirement of thickness, while the material of the flange with the butt welding with the neck is mostly machined by forging steel;
3. nominal pressure is different: nominal pressure of flange with neck is 0.6-4.0MPa, and nominal pressure of flange with neck butt welding is 1--25MPa grade.
Marking According to customers’requirement
If you require further information or you do not see what yo need in our web,please do not hesitate to contact us. Our customer service specialists will be happy to help you.
contact us any
Другие товары поставщика
|
|
90°Elbows Pipe Fittings 45° Elbows Pipe Fittings |
90°Elbows Pipe Fittings
A 90°elbow is a metal pipe fitting that changes the direction of the pipe on a carbon steel pipe. Connection mode ... |
|
|
Rectangular Low Carbon Steel Pipe |
Grade :A53(A,B), A369, St37, St52, St42, ST35, Q235, Q345, Q195 Length :2-12meter Outer Diameter :20-400mm Thickness :0.8-13mm...
rectangular low ... |
|
|
Monel Steel |
Monel Steel
bar （mm）8-300MM
Wire (mm) 0.2-8MM
Outer diameter of steel tube (mm) 3-426MM0.5-60 wall thickness
Strip (mm) thickness 0.05-... |
|
|
Equal Tees Pipe Fittings |
Three links also known as pipe fittings or three-way pipe fittings, three-way joints, etc. Mainly used to change the direction of the fluid, used i... |
|
|
Welding Neck Flanges |
Neck flange diameter range: DN10~DN600 Specification: Class 150#, 300#, 400#, 600#, 900#, 1500#, 2500# Size As per customers requirement Face type ... |
Все товары поставщика
Похожие товары
