SDS Steel Fiber

There are many types of steel fibres used in concrete. The steel fiber for concrete reinforcement is a new kind of metal material, in order to enhance concrete with metal fiberand shotcrete in its hardened state. Tengzhou SDS steel fibers make concrete have extremely high flexural strength and shear strength, and have good toughness, crack resistance, earthquake resistance, seepage control, and other functions. Widely used in industrial factory floors, highways, high-speed rail, bridges, airports, tunnels, water conservancy, electric power, municipal engineering, etc. The company has passed ISO9001 certification, and its products are exported to Southeast Asia, Europe, America and etc. Welcome to contact us for more information about steel fibers for concrete reinforcement.

Loose Hooked End Steel Fiber

It is used in industrial floors and etc.

Micro Copper Coated Steel Fiber

It is widely used in Reactive Powder Concrete. The raw materials used in the production of RPC cover mainly include: 425R ordinary portland cement, quartz sand, steel fiber, micro-silica powder, slag powder, RPC special additive, clear water and etc.

Glued Hooked End Steel Fiber

It is widely used in industrial floors, parking lot, road pavement and etc.

The Formation of Steel Fiber

Steel fibers are defined in ASTM A820 as pieces of smooth or deformed fibers that are sufficiently small to be dispersed at random in a concrete mixture. ASTM A820 steel fibre reinforcement designates tensile requirements, dimensions and permissible variations. There are mainly 4 steps for steel fibers based on our production process:

Raw Material

Dry Drawing

Glued

stampling Forming

The Benefits of Steel Fiber

For the same mixing and construction, there is no need to add equipment or increase the construction cost of metal fibers for concrete due to the low steel fibre cost.

Under the same strength requirement, metal fibers for concrete can replace steel mesh and reduce the pouring thickness of concrete by 15-25%.

Improve the construction conditions, mixing vehicles and construction personnel can reach the site directly, and shorten the construction period by 30%. Steel fiber reinforced concrete has high tensile strength, which can prolong the distance between contraction joints and facilitate continuous and rapid pouring of concrete.

Convenient construction, saving labor, greatly shortening the construction period and saving the total steel fibre cost.

The Working Principle of Steel Fiber

Shotcrete steel fibrefor concrete reinforcement reinforce in three dimensions throughout the entire concrete matrix. Metal fiber concrete performance is based on the combination of the tensile strength, aspect ratio(length/diameter) and anchorage. The distributed steel fiber reinforcement restrain micro-cracking and redistribute accumulated stress caused by applied loads and shrinkage. The sooner the crack is intercepted and its growth is inhibited, the less chance the crack will occur.

FAQs of Steel Fiber

What is steel fiber reinforced concrete?

Fiber reinforced concrete is comprised of hydraulic cements containing fine and course aggregatea and fiber. A super-plasticizer is ofter used to enhance the mix workability. Fiber products are available in a variety of types and sizes. The underlying principle however on all fiber reinforced concrete is to provide discoutinuous reinforcement and effective crack control.

How do fiber work?

Fibers reinforce in three fimensions throughout the entire concrete matrix. Fiber performance is based on the combination of the tensile strength, aspect ratio(length/diameter)and anchorage. the distributed fibers resrain micro-cracking and redistribute accumulated stress caused by applied loads and shrinkage. The earlier a crack is intercepted and its growth inhibited, the less chace it will have develop.

What are the types of steel fibers used in concrete?

Types of steel fibre including：1.Straight 2.hooked 3.Crimped.4.Double duoform 5.ordinary duoform 6.paddied 7.enlarged ends 8.irregular 9.indented.

Is there a difference between Micro and Macro Synthetic Fiber?

Macro synthetic fibers are intended to carry a load and therefore, can be used to replace traditional reinforcement. Typical applicationss are: slabs on ground, shotcrete, precast and composit metal deck applications. Macro synthetic fibers are also used to eliminate both early and long term cracking. Micro fibers are generally utilized to minimize early age plastic shrinkage cracking and aggregate settlement that can occur within the first 24 hours.

There are many concrete fiber manufacturers, but we are one of the best choices for you.

Другие товары поставщика

	SDS-05030 0.50mm Diameter 30mm Length Glued Steel Fiber	This kind of steel fiber is made of high-speed wire, when you add it to concrete, which can improve the toughness, bending and tensile strength, sh...
	Steel Fibers For Crack Control	Steel Fibers For Crack Control Why we use steel fiber for cracking control? The steel fiber has a high tensile strength of 1000Mpa, which cou...
	SDS-05035 0.50mm Diameter 35mm Length Glued Steel Fiber	The glued steel fiberare water-soluble with good dispersion in concrete. It is widely used in construction, highway pavement, bridge, tunnel, airpo...
	Steel Fiber For Fatigue Resistance	Steel Fiber For Fatigue Resistance Fatigue resistance of steel fiber compared with ordinary concrete, the flexural and compressive fatigue propert...
	SDS Loose Hooked End Steel Fiber	Hooked end steel fiberwas made of high-quality cold drawn steel line, in order to make sure that it has high tensile strength and animal tolerance....

Все товары поставщика

Похожие товары

	U71MN QU70 Crane Rail	Продавец: Hebei Yongyang Special Steel Group Co., Ltd	YONGYANG Railcan supply all kinds of steel rails, including light rail, heavy rail, crane rail, l...
	P43 Steel Rail Supplier China	Продавец: Hebei Yongyang Special Steel Group Co., Ltd	P43 railis also called 43kg rail, which is the same as GOST R43 rail. P43 steel railis a Chinese ...
	Chinese Standard Light Steel Rail Gb 8kg Steel Rail	Продавец: Hebei Yongyang Special Steel Group Co., Ltd	YONGYANG Rail is an 8kg steel rail supplier from China, It can supply all kinds of steel railsand...
	136 RE (TR68) Railway Rail	Продавец: Hebei Yongyang Special Steel Group Co., Ltd	136RE railis a type of steel rail used in railway tracks, primarily in America. The “136RE&...
	Japanese Standard Rails	Продавец: Hebei Yongyang Special Steel Group Co., Ltd	YONGYANG is a leading supplier of high-quality rails adhering to various international standards....