HS 2343ESR-S Hot Work Die Steel
As large-size (thickness range 400-750mm) and high-polished plastic mold steel, HS 2343ESR-S, as a 1.2343 steel equivalentmaterial, has higher purity and good structure uniformity through unique smelting and heat treatment process.
The hot work steelhas good polishing performance, good cold, and hot fatigue resistance and corrosion resistance, cold and hot processing performance, hardenability, as well as high thermal strength, oxidation resistance, high toughness, and wear resistance at medium temperature.
HS 2343 ESR-S (1.2343 MaterialSteel Equivalent) Chemical Properties
Steel Grade |
C |
Si |
Mn |
P |
S |
Cr |
Mo |
V |
HS 2343ESR-S |
≤0.014 |
≤0.002 |
HS 2343 ESR-S (Material 1.2343 Equivalent) Applications
Plastic molds with a thickness of more than 400mm;
Auto lamp mold, automobile bumper, and dashboard mold, etc.
HS 2343 ESR-S (1.2343 Steel Equivalent Material) Features
Electroslag remelting, high-temperature diffusion annealing and ultra-fine heat treatment are applied, and make good structure uniformity and finely dispersed carbides;
Good heat and cold fatigue resistance and corrosion resistance, good cold and hot processing performance, high toughness and wear resistance;
High purity control brings high polishability;
High isotropy, aspect ratio ≥0.85;
Annealing hardness ≤200HB, quenching hardness 50-60HRC, tempering hardness 46-48HRC.
Material 1.2343 Steel Equivalent
HS 2343 ESR-S steel, which is a 1.2343 steel equivalent material, belongs to electroslag remelting hot work die steel. It has uniform microstructure, excellent machinability and polishability, high toughness and high plasticity, high wear resistance, and overall hardening performance at high and low temperatures are both excellent. You can find 1.2343 steel equivalent to ASTM A681 H11 / ISO 4957 X37CrMoV5-1 / GB/T 1299 4Cr5MoSiV /JIS G4404SKD6 / FDAC from HITACHI
HS 2343 ESR-S (Material 1.2343 Equivalent) Heat Treatment
Soft Annealing:
820 to 860°C, after being heated through, cooling down to 600°C at a rate of 10°C/h with the furnace, then air-cooling, hardness max 230 HB.
Stress relief annealing: after rough machining, heating to 650℃ and holding for more than 2h, cooling down to 500℃ with the furnace, and then air cooling.
Quenching:
Preheating under a protective atmosphere to 500-600 ℃ for the first time, 820-860 ℃ for the second time, and finally heating to 900-1010 ℃
Quenching after being heated through at the quenching temperature for more than 30 minutes, hardness will be 50-55HRC.
Tempering:
Slowly heating to tempering temperature 560-600 °C after quenching, and it is recommended at least twice tempering. Achievable hardness: 42−50 HRC.
As a die steel supplier, we will do our best to meet all the needs of customers.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
HS 2311 Plastic Die Steel | There are steel equivalents of different materials in the market, including s136 steel equivalent,2738 steel equivalentand 2311 steel equivalent. ... | |
HS DIE STEEL & SHAPED FORGINGS PRODUCTS | From automotive/high-speed rail to aerospace, from wind power generation to gears, from high-pressure boilers to mechanical transmission, from oil ... | |
1.2083 Steel | Introduction of 1.2083 Steel Chemical properties of 1.2083 Steel Steel Grade C Si Mn P S Cr ≤1.00 ≤1.00 ≤0.03... | |
1.2316 Steel | It is DIN standard mold steel, which belongs to martensitic stainless steel for plastic mold. Chemical properties of 1.2316 Steel Steel Grade... | |
Disk / Flange Forging Component | The basic process used for disk forgingis upsetting, and then chamfering, rounding, and leveling as the subsequent auxiliary processes and finishin... |
Похожие товары
Прямая труба из хромоникелевого сплава центробежного литья | Продавец: Нанкин Xinshuo Механическое оборудование Лтд | Прямая труба из хромоникелевого сплава центробежного литьяДля получения дополнительной техническо... | |
White Iron Wear Blocks, Wear Bars | Продавец: Yiwu WALKSON Machinery Equipment Co., Ltd. | The unique, formable designed wear bars is available in various lengths, grades and sizes and can... | |
TITANIUM ALLOY STEEL TUBE | Продавец: YUHONG GROUP CO., LIMITED ZHEJIANG YUHONGWELL STEEL CO., LIMITED | TITANIUM ALLOY STEEL TUBE Titanium is the ninth most abundant element in the earth's crust and t... | |
STEEL FITTING | Продавец: YUHONG GROUP CO., LIMITED ZHEJIANG YUHONGWELL STEEL CO., LIMITED | STEEL FITTING Steel has been used for making pipe and pipe fittings for years for its durability... | |
STAINLESS STEEL PIPE/TUBE | Продавец: YUHONG GROUP CO., LIMITED ZHEJIANG YUHONGWELL STEEL CO., LIMITED | STAINLESS STEEL PIPE/TUBE Stainless steel pipe/tube is one of the most widely used in manufactur... |