Rewinding Line
Rewinding/ recoiling lines will encounter the problem of strip skidding during the actual usage which can lead to production barriers like strip deviation, at the meantime, coil processing linecan affect the security of production equipment. With the pressure roller, tension rolls for the rewinding unit can prevent the strip from slipping on the surface of the rolls and get initial tension.
BOYA Rewinding Line Features
The force increase of tension roller unit was achieved by wrapping effect of each tension roll.
In the condition of the rewinding line wrapped around a roll was affected by a certain initial tension, the friction force between them reached a maximum number and the transfer power outreached the maximum friction, there will be skidding between the strip of recoiling lineand the roll surface.
Automatic Sleeve Feeding arrangement system.
Entry Flattener with Quick Opening Feature.
Doctor blade to be provided for all entry/exit deflector rolls, bridle rolls, and turn rolls.
The Coil car will have auto coil shuffling to move the coils up to saddle one.
Full line canopy covers.
The Belt Wrapper is designed in such a way that it will be suitable for under and recoiled.
Tinplate and Carbon Steel.
Trimming Speed: 720Mpm Leveling Speed: 600Mpm
Rewinding LineStrengths
The coil car will be lifted up to the collapsed mandrel So that we can easily unload small coils from the mandrel.
Low pressure system to prevent damage when removing small coils.
Improve the flatter efficiency.
High precision and stable control system.
Safety and reliable production process.
Compact structure and easy maintenance, environmental protection.
Rewinding Line Working Principle
01
The recoiling line running speed also can affect the total friction between the strip and the roll surface. When the strip runs under a higher speed, the positive pressure of the strip on the roll surface is lower, and the gas passing between strip and roll surface in the entrance cannot be exited quickly, which can continue to accumulate with the increase of speed. Therefore, on the one hand, the actual wrap angle between the strip and the roll surface is reduced, on the other hand, the coefficient of friction between them is also diminished. Finally, all of them results in the decrease of the whole friction, which can be represent apparently under the poor incoming plate shape. In conditions of the same initial tension of tension roller unit, the entrance roller unit with a small force has a higher slip probability than the exit one with a higher force.
02
The slipping of any tension roll unit will cause scratches to the surface of the strip. In the rewinding line, the light damage can degrade product quality, while the heavy one will scrap the strip. So the slipping of the tension roll unit is extremely harmful to production.
03
At the same time, the slipping of any tension roll unit will have a direct effect on itself, which can make the roller surface smoother and smoother. The friction coefficient diminished rapidly, so we need to regrind the roll surface and the roll usage period will be shorted. In addition, the skidding of tension roller unit can cause motor output torque to fluctuate, impact the transfer decelerator, make gear failure and defect the decelerator.
04
In order to prevent slipping, rewinding line diameter is selected based on the principle that no plastic deformation occurs after the strip passed through the tension roller. The max thickness of coil processing line strip is the main factor to determine the max diameter of tension roller. The phenomenon that the slipping probability of cold-rolled thin strip steel is significantly increased under the large tension roll diameter. There should be a limit to the adaptation scope of strip, the diameter of tension roller is not the bigger the better. In order to add the friction coefficient as soon as possible, we need to increase the roughness of the roll surface.
05
Although we cannot eliminate the slipping of tension roll through the way of improve the electrical control of tension roller unit, we can provide the reasonable and perfect electrical control method which can benefit to diminish the degree of slippage. Therefore, we can decrease the wear of tension roll, and it is helpful for us to find and correct the slipping.
As one of the most professional fine blanking press manufacturers, we provide metal shearing machine, Steel plant finishing line,steel coil processingand etc. Want to know more, contact us.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
Side Trimmer for Rewinding Line | The side trimmer for the rewinding line provided by BOYA adopts a unique modular design, and its processing performance and control accuracy have r... | |
Fine Blanking Line | Fine Blanking Line Based on BOYA's excellent coil processingand manufacturing capacity and rich series of products, we have a complete set of fine... | |
Cut to Length Machine | BOYA metal cut to length machineis often used in steel rolling production line. In the continuous rolling billet workshop or small section workshop... | |
Scale Breaker | Scale-breaking tension leveller, also called scale breaker, is generally used for continuous pickling units. Scale breaker machine applies to bend ... | |
Hydraulic Nut | Hydraulic nutis a strong fastening component, it is a special nut that integrates a hydraulic device on the nut body and locks the connecting objec... |
Похожие товары
Plain Steel Mesh | Продавец: Hebei Jiushen Wire Weaving Co., Ltd | Plain steel wire meshis a kind of wire mesh that woven from various kinds of carbon steel wires. ... | |
18650 Nickel Strip Phone Battery Spot Welding Connector Sheet | Продавец: Shenzhen Wikshu Technology Co. | Описание 3GOA высокой чистоты 18650 аккумулятор никель полосы литиевой батареи разъем 1M 5M 10M н... | |
The 25th China (Guangzhou) Int'l Stainless Steel Industry Exhibition | Продавец: GUANGZHOU JULANG EXHIBITION DESIGN CO., LTD | 2025China(Guangzhou)International Metal &Metallurgy Exhibition THE 25thCHINA(GUANGZHOU) INTE... | |
Прямая труба из хромоникелевого сплава центробежного литья | Продавец: Нанкин Xinshuo Механическое оборудование Лтд | Прямая труба из хромоникелевого сплава центробежного литьяДля получения дополнительной техническо... | |
STAINLESS STEEL PIPE/TUBE | Продавец: YUHONG GROUP CO., LIMITED ZHEJIANG YUHONGWELL STEEL CO., LIMITED | STAINLESS STEEL PIPE/TUBE Stainless steel pipe/tube is one of the most widely used in manufactur... |