BJSL-800H Die Cutting And Creasing Machine
Model: BJSL-800H Automatic die cutting & creasing machine Introduction
BJSL-800H Automatic platen die-cutting and creasing machine is a key equipment for die-cutting,Website:, creasing and cold embossing various packing and decorating products such as cartons , paper boxes and trade mark labels .Its professional high-precision indexing mechanism ,thin sheets reducer , air clutch , pneumatic sampling device and high speed feeding system ensure smooth feeding and accurate registering .High strength gripper bar , front and back register device ,side register device enable its high die-cutting precision .Original delivery device makes delivery smoothly and orderly. The 800620mm format is especially suitable for processing four cigarette boxes at the same plate.
Computer and man-machine interface show all the working state and troubleshooting methods. Thus complete automation is achieved. Key parts, controlling system, main chains and fastening pieces are imported. Their reasonable design and fine setup guarantee the high quality of the products. For this model, we have CE version (BJSL-800M) for option.Technical Parameters
Max. sheet size800×620mmMin. sheet size360×290mmMax. die cutting size790×610mmMin. front margin5mmDie cutting Precision±0.1mmMax. die cutting pressure150TPaper specification100-2000 g/m2Corrugated board≤2mmMax. speed8500S/HMax. height of feeding pile1400mmTotal power13KWMax. height of delivery pile1030mmTotal weight10TOverall size(L×W×H)4290×2330×1980mmRemark: overall dimension with preloading unit and pedal is 5620X3160X1980mm. 1、Super heavy paper feeding mechanism
·Louver feeding Mechanism, Max. Speed 150 S/M
·Preloading Mechanism, realizing no-stop feeding
to improve efficiency
·Double Circuit Power-off Protection to Prevent Feeder From Accidental Crash, stable and liable
·Before paper arriving at front lays, Speed lower automatically
·Push and Pull Two-way Side Guide
·Electromechanical Double-sheet Inspection Mechanism
·Import Conveying Belt
·PLC and electronic Coder Control Whole Machine Timing
·Side lay and front lay detect paper position
· Programmed Control Pump Start, Ensuring Each Paper Reaches Front Lays
Precisely, When Start The Machine At Any Time, Reducing Make-ready Time
·Double-sheet Malfunction Take Place, Time-delay Stop to ensure Taking paper out
of the Machine from the Conveying Unit
·All Side guides and Front Guides Equipped with Detection Sensors
·Main and Vice feeding pallets Switch automatically, Realizing non-stop feeding
·Strong power sucking feeder, 4 pick suckers and 4 feed suckers, suckers angle can
be adjusted according to the curve of paper
·Suckers and valve made of super hard alloy
·Super power feeder, can work on 2000gsm cardboard and 2mm corrugated paper
easily
·Preloading system 2 Die Cutting Unit
·40 Cr shaft
·Worm 40Cr quenched
·Machine base, wall plates, top and bottom tables
are made of QT60 resin-bonded sand technical nodular graphite iron casting.
·Main driving base oil auto recycle and lubrication system
·super-hard anode alumina alloy gripper bars and precise positioning structures (5
groups)
·Import High-strength Gripper bar chain
·230°high-precision Index
·230°+130°intermittent scissors die cutting
·import Italian air clutch and brake mechanism
·1 set of gripper bar as spare parts
·5+2mm combination super hard steel plates or 7mm super hard steel plates(optional)
·Adjustable frame
·Centre-line system
·Barring Mechanism
·grippers position micro-adjust mechanism 3、Delivery Unit
·Manual vice delivery mechanism, simple but reliable
·Automatic trimmer and integrated hair brush
·Involution photoelectric sensor to prevent delivery pallet from going too high and
paper rolling up 4、Chain Driving
·Main driving chains are all imported
·Import oil-retaining nylon chain guider 5、All motors are imported
·Main feeding motor is retard motor with frequency control
·Main feeding and delivery motors 0.75Kw
·Vice feeding motor 0.4Kw
·Main Motor ABB,7.5 Kw
·Air Pump Motor 3 Kw
·Oil pump motor 0.4Kw 6、Whole Machine Control：
·Japan Mitsubishi PLC
·Japan Fuji 5.5 inch interface
·Japan Omron coder and sensors
·SMC Magnetic Valve
·Japan Yaskawa G7 frequency converter
·There are 26 detection points monitored by PLC on the machine:
Main feeding pallet upper limit、main feeding pallet bottom limit、feeding pile upper
limit, feeding pile over high, main delivery pallet upper limit、main delivery alarm
warning, main delivery pallet bottom limit, operation side lay, driving side lay、
driving side front lays、operation side front lays, delivery safety check, idle check,
counter, involution check, frame lock check, steel plate check, delivery chain check,
front window check, back window check, double-sheet check, feeding paper angle
check, paper feeding safety, conveying abnormality, oil pressure protection, air
pressure protection. 7、Lubrication System
·Import automatic oil pump lubrication system
·High-powered oil chiller
·American Bijur automatic driving chains intermittent lubrication system
·Brass oil pipe
·Japanese SMC gas circuit system
Другие товары поставщика
|
|
|
Model: BJQZX-1150 Introduction This machine is with 7inch computer and the computer have 30 groups program and each program has 126 cutting ca... |
|
|
|
Model: BJQZX-1370 Introduction This machine is with 7inch computer and the computer have 30 groups program and each program has 126 cutting ca... |
|
|
|
Advantage:
1. Made of high spring rubber and stick the spread cloth on the back of the rubber
2. Good Spring back capacity/ High resi... |
|
|
|
BJZSFM-1100 Automatic Vertical High-precision And Multifunction Laminating Machine
Characteristics
. The machine can use one machine,Website... |
|
|
|
Advantage:
1. Made of ordinary spring rubber and stick the spread cloth on the back of the rubber
2. Good Spring back capacity/ High ... |
Все товары поставщика
Похожие товары
|
|
Машина для наполнения мешков с клапанами, полностью автоматическая линия для упаковки мешков с клапанами, наполнитель мешков из крафт-бумаги, упаковщик мешков с клапанами, машина для взвешивания мешко |
Продавец: Wuxi HY Machinery Co., Ltd. |
无锡航一机械有限公司 WUXI HY MACHINERY CO., LTD. Машина для наполнения мешков с клапанами, полностью автома... |
|
|
Машина для наполнения мешков с клапанами, полностью автоматическая линия для упаковки мешков с клапанами, наполнитель мешков из крафт-бумаги, упаковщик мешков с клапанами, машина для взвешивания мешко |
Продавец: Wuxi HY Machinery Co., Ltd. |
无锡航一机械有限公司 WUXI HY MACHINERY CO., LTD. Машина для наполнения мешков с клапанами, полностью автома... |
|
|
Машина для наполнения мешков с клапанами, полностью автоматическая линия для упаковки мешков с клапанами, наполнитель мешков из крафт-бумаги, упаковщик мешков с клапанами, машина для взвешивания мешко |
Продавец: Wuxi HY Machinery Co., Ltd. |
无锡航一机械有限公司 WUXI HY MACHINERY CO., LTD. Машина для наполнения мешков с клапанами, полностью автома... |
|
|
Машина для наполнения мешков с клапанами, полностью автоматическая линия для упаковки мешков с клапанами, наполнитель мешков из крафт-бумаги, упаковщик мешков с клапанами, машина для взвешивания мешко |
Продавец: Wuxi HY Machinery Co., Ltd. |
无锡航一机械有限公司 WUXI HY MACHINERY CO., LTD. Машина для наполнения мешков с клапанами, полностью автома... |
|
|
Машина для наполнения мешков с клапанами, полностью автоматическая линия для упаковки мешков с клапанами, наполнитель мешков из крафт-бумаги, упаковщик мешков с клапанами, машина для взвешивания мешко |
Продавец: Wuxi HY Machinery Co., Ltd. |
无锡航一机械有限公司 WUXI HY MACHINERY CO., LTD. Машина для наполнения мешков с клапанами, полностью автома... |
