Retractable CIP rotary spray nozzle

• 

STD-150 retractable CIP rotary spray nozzle

Dynamic Retractor CIP systems clean even the remotest corners. Where to attach the spray head? This question arises with nearly every CIP installation. In most cases, spray shadows caused by baffles, such as agitators, manholes, inspection glasses and a host of other muffs complicate the setup of an efficient CIP cleaning. The solution for this is a retractable cleaning systems.

An elegant solution is a so-called retractor using flood cleaners. A pneumatic drive extends the flood cleaner to its place of operation. This in itself is nothing new: technical variations have been known on the market for many years. The STD retractable tank cleaning nozzle combines this fundamental idea with the modern demands on a CIP cleaning system. Depending on the cleaning head model and the working pressure, flow rates between 1 and 10 m³/h are currently possible. A detergent pressure between 1 and 8 bars can be selected.

Another important component of the retractable tank cleaning nozzle is the hydraulic pipe. Employing the new pipe standard DIN 11866 permitted a considerable reduction of the installation size and thus of the cavity into which the spray head is retracted.

Some important features at a glance:

low wear PEEK body

slide bearing

easy to maintain

drainable

designed for the food Industrie

spray nozzle Application:

STD-150 series retractable rotary nozzle are well suited to pharmaceutical, food and beverage, chemical and other industries. Particularly suitable for pipes and corner,such as spray dryer.

Spray dryer

Fluid bed dryers

Granulator

Pipe

Другие товары поставщика

	Wool Fineness Analyzer	Wool fiber fineness value is measured by the airflow method. When exerting a certain pressure air to a certain amount of mass and volume of sample ...
	Air - tightness Testing Device for Automotive Connectors	The air - tightness testing device for automotive connectors uses the pressure principle to conduct non - destructive tightness tests on containe...
	Barrel handling equipment	Barrel Clamps ModelDescriptionRated Load DTC Dual-Barrel Clamp 720 kg STC Single-Barrel Clamp 360 kg STD12 Transfer...
	Single Cable Vertical Flame Tester	introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a single insulated wire or cable is a bench scale te...
	Custom horizontal plate air-powered mixers	STDHorizontal plate mixer for small tanks STD2 For small tanks, with reducer, stainless steel horizontal plate, and special blades (for high-visco...

Похожие товары

	Seat Bumping and Creep Test Bench	Продавец: Standard International Group (HK) Limited	This test bench is used for simulating the car seat bumping and creep situation when a car is run...
	Automobile seat belt fixed point test bench	Продавец: Standard International Group (HK) Limited	Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur...
	Impact strength tester for car seat headrest	Продавец: Standard International Group (HK) Limited	Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi...
	Impact strength tester for car seat launching headrest	Продавец: Standard International Group (HK) Limited	Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w...
	Automobile Headrest Strength Tester	Продавец: Standard International Group (HK) Limited	Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me...