Automotive Wires Low - temperature Winding Tester
The low - temperature winding tester for automotive wires is used to assess and determine the performance of circular wire cables or circular insulated wire cores in low - temperature conditions.
Test Standards:
ISO 6722. ISO 14572. ISO 19642. SAE J1128. QC/T 730. JASOD611 - 2009. etc.
Main Parameters:
1) Low - temperature winding sample:less than 25mm²
2)Diameter of winding rod:Φ6. 8. 10. 12. 15. 18. 20. 25. 30. 32. 40. 50. 58. 62.5. 74. 82.5. 90. 98.5mm (optional)
3) Weight weights: 0.5. 2.5. 5. 8. 10kg and combined weights: 4 pieces of 10kg (Note: for large loads such as 30KG weight test, two samples are used in one group)
4) Number of winding turns of the sample:3 turns 5) The winding rods and brackets of this series of devices are made of stainless steel.
Electric Controller of Low - temperature Winding Test Device for Automotive Wires:
1. Servo motor: 1500W
2. Controller: PLC + touch screen
3. Winding speed: up to 130 revolutions per minute (set on the touch screen)
4. The number of winding turns can be set (set on the touch screen)
Qinsun Instruments Co., LTD is a professional laboratory testing instrument manufacturer in China,Have been focusing on laboratory instrument R&D more than 30 years and have rich industry experience,Based on international testing standards,We are also the instrument supplier for BV SGS laboratory,We provide one-stop solutions for lab instruments,Free Training and Turn-Key Service,Products exported all over the world,Offer 36 month warranty and are a trustworthy partner.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Internal and external filters | Applicable Standards Both filter types adhere to industry-specific regulations, including: ISO 10526(Standard illuminants for colorimetry, e.... |
 |
Automotive Wires Liquid Resistance Tester-QINSUN | Test Standards: Requirements for liquid resistance tests of automotive wires in ISO 6722. SAE J1128. QC/T 730. and JASOD611 Main Parameters: T... |
 |
Rubbing Color Fastness Tester | Introduction Manual friction fastness tester is the most commonly used instrument for the textile industry to detect the color fastness of the... |
 |
100-V2 steam generator tester | Meet the standard: The 100-V2 steam generator meets the requirements of Ford FLTM BI 107-05. GMW15919 and FCA LP-463PB-64-01 thermal shock test sp... |
 |
Porton Thermal Manikin Equipment | Product Introduction: Porton-man was commissioned by the Defense Science and Technology Laboratory (DSTL) to accurately represent military users. ... |
Похожие товары
 |
Seat Bumping and Creep Test Bench | Продавец: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | Продавец: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | Продавец: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | Продавец: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | Продавец: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
