Automobile Seat Frame Strength Test Bench

• 

Applicable standards:

The National Standard of the People's Republic of China (GB) : such asGB 15083. this standard specifies the strength requirements and test methods of the car seat system, which is applicable to the seats and their fixtures of M and N cars.

Federal Motor Vehicle Safety Standard (FMVSS) : such asFMVSS 207. this standard specifies the strength requirements of the seat back and its adjustment device and applies to all seats in Class M1 vehicles.

Economic Commission for Europe Regulation (ECE R) : such asECE R17. this regulation regulates the strength of car seats, seat belt anchors, etc.

Main parameters:

Loading capacity:The test bench should have sufficient loading capacity to simulate the various loads that the seat may withstand in actual use. For example, for a 20g static loading test, the test bench needs to be able to apply a force equivalent to 20 times the gravity of the seat assembly.

Loading method:The test bench should support a variety of loading methods, such as horizontal forward, horizontal backward, torsion, etc., to meet the needs of different test projects.

Test accuracy:The loading accuracy and measurement accuracy of the test bench should meet the requirements of the relevant standards to ensure the accuracy and reliability of the test results.

Number of tests:The test bench should have the function of setting and recording the number of tests for durability testing.

Control mode:The test bench is usually controlled by computer servo to achieve accurate loading and measurement.

Data acquisition and processing:The test bench should be equipped with a data acquisition system, which can automatically record various data during the test process and generate test reports.

Standard:

GB 15083-2006 "Automotive seats, seat fixers and headrest strength requirements and tests"

GB 13057-2003 "Strength of passenger car seats and vehicle fasteners"

QC/T 740-2005 "Passenger Car Seat Assembly"

QC/T 633-200× "Bus seat"

JT/T460-2001 "Passenger car seat back Angle adjuster technical requirements"

Другие товары поставщика

	Automotive Wires Flammability Tester-QINSUN	Compliance Standards FMVSS 302 (Federal Motor Vehicle Safety Standard) ISO 6722 (Road Vehicle Cable Flammability) UL 94 (Tests for Flammability ...
	Durability Tester for Automotive Wire Markings	Test Standard: Complies with the ISO19642 standard. Test Method: For the durability tester of automotive wire markings, fix a wire approximate...
	3D Geophysical Instrument	Product Introduction: The 3D Formation Tester measures layers of paper, fiberglass, cardboard, paper towels and towels, and many other sheetlike m...
	ISO 12103-2 M2 Test Dust	Product Introduction: Particle Technology Fuel Contamination Test Dust offers a full range of fuel contamination test materials used to test the...
	High and low temperature universal creep testing machine	Product Introduction: High and low temperature universal creep testing machine is mainly used for non-metallic materials creep, stress relaxation,...

Похожие товары

	Seat Bumping and Creep Test Bench	Продавец: Standard International Group (HK) Limited	This test bench is used for simulating the car seat bumping and creep situation when a car is run...
	Automobile seat belt fixed point test bench	Продавец: Standard International Group (HK) Limited	Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur...
	Impact strength tester for car seat headrest	Продавец: Standard International Group (HK) Limited	Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi...
	Impact strength tester for car seat launching headrest	Продавец: Standard International Group (HK) Limited	Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w...
	Automobile Headrest Strength Tester	Продавец: Standard International Group (HK) Limited	Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me...