Teeth Tray Mold
A dental impression is a mold removed from a tooth to diagnose and treat dental conditions. They are also used in forensic science. Impressions are also known as dental or dental casts. Usually, impressions are made in the dentist's office, although dentists may also travel to the patient or subject in exceptional circumstances due to the relative portability of the required equipment.
High-quality Injection Mold for Denture Impression Tray Mold
The Denture Impression Tray Mold we have made is high control precision, no eccentricity, with Excellent cooling system, reduced molding cycle.
Basic Information For Denture Impression Tray Mold
Teeth Tray Mould Specification
Description Denture Impression Tray Mold
Plastic material PP
Specification 70*62*18 mm
Cavity No 10 cav
Mould size 450*600*381mm
Mold steel S136
Molding cycle (S) 45S
Mold life 500 K
Our Advantages Of Making Mould Teeth Trays
A professional team and advanced equipment can improve product added value and reliability for our customers.
As one of the specialized medical injection moulding manufacturers, we have standardized project management process.
Production environment and management system in line with international standards.
Points For Attention In The Manufacturing And Production Of Medical Plastic Molds
Because medical devices have special requirements for hygiene and safety, surface smoothness, corrosion resistance, and other properties, the medical device injection molding plays an important role in the production process of their products. Higher requirements are put forward for mold manufacturing, product production equipment, and processes used for medical devices, especially for disposable medical devices.
Strict requirements for the selection of mold materials
Most disposable medical device products use medical-grade polyvinyl chloride (PVC) and polycarbonate (PC). Because PVC has better corrosion resistance than steel, and PC has higher hardness, there are strict requirements for the selection of mold materials. It is recommended to use Sweden-Shengbai S136H or Japan's Datong NAR-80 steel, these two materials have strong corrosion resistance and high polishing performance.
Heat treatment process to control hardness
Due to the good fluidity of medical-grade PVC materials, the parting surface is deformed due to the soft material of the mold during the use of the mold, which in turn leads to flash burrs during the injection molding process. Therefore, there are higher requirements for the hardness of such mold materials.
Reasonable and accurate structural design
For transparent products, try to choose hot runners to reduce the traces of merging; when using cold runners, the size of the runners should be shortened as much as possible for soft PVC; due to the small size and large batches of disposable medical devices, automatic unloading, shearing and pouring should be used. In order to ensure production efficiency and quality; the mold cooling system should adopt multiple sets of separate cooling water channels to reasonably control the temperature of the movable and fixed molds to control the deformation of the products.
High precision mold manufacturing requirements
In the manufacturing process of medical plastic product molds, the parting surface is required to be tight, and the precision of the mold should be ensured by means of equipment processing.
Selection of injection molding machines and parts
The injection molding machine should use a small screw to ensure the injection molding accuracy and use an automatic unloading device. Gas-assisted unloading can be used when the mold is ejected; the machine tool is equipped with a manipulator to realize the fully automatic process from product molding to packaging and minimize pollution links.
The injection molding workshop should be clean and up to standard
The production workshop should be fully enclosed, install high-power air-conditioning ventilators, and remove harmful gases in time to ensure constant temperature and clean air in the workshop; when shutting down, clean the screw and barrel immediately to avoid damage to the screw of the injection molding machine from residual raw materials; GMP standard, strictly in accordance with IS0 9000 quality management system, to ensure that there are no problems in the production process.
As a reliable injection molding factory, we will do our best to meet all the needs of customers.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Injection Mold & Molding Parts Solution | Green Vitality Industry is a full-service mold manufacturer specializing in plastic injection mold design & engineering support, injection mold... |
 |
Mouse Mold | One computer mouse usually includes these plastic parts: a bottom shell, an upper cover, a middle cover, a wheel, a base of wheel, a frame which co... |
 |
Soap Box Mold | Plastic soap is also made by plastic injectionmold, as it need dimensional stability, good apperance and good color performance, so we have to choo... |
 |
Plastic Toilet Seat Mold | Toilet seat casting moldquality points: cover mold cycle, cover mold life, Parting line whether there are sharp edges? Is the cover wall thickness ... |
 |
Fan Mold | If the weight of each fan blade is not balanced, large vibration, high noise, and large wear of the rotating shaft will occur during high-speed rot... |
