PA6 GF15 With High Tensile Strength (A1307C, A1317C) for Engineering Plastics
PA6 GF15with high tensile strength is made by 15% glass fiber reinforced, toughened, polyamide 6 resin for injection molding.
Typical Application of PA6 GF15with high tensile strength (A1307C)
PA6 with 15% glass fiber toughened plastics, due to its excellent properties, good appearance and easy processing characteristics, which has been successfully applied to the electrical field such as switches, controllers, the auto field such as heat dissipation barriers, accumulator shells, coolant pots, and the mechanical filed such as electric drill and motor housing, pump impeller, pulley, tool handle and bearing.
Processing Detail of PA6 GF15 with high tensile strength (A1307C)
Other Details of PA6 GF15 with high tensile strength (A1307C)
Physical Property
|
Ash |
(15.0% 1 ISO3451/1) |
|
Conditioned |
600°C*2h |
|
Density |
(1180Kg/m3 1 ISO1183) |
|
Conditioned |
23°C |
|
Shrinkage Parallel Flow |
(0.5-0.7 % 1 ISO294-4) |
|
Shrinkage Vertical Flow |
(0.7-1.1% I ISO294-4) |
Mechanical Properties
|
Tensile strength(115.0MPa 1 ISO527) Conditioned |
5mm/ min |
|
Tensile Strain at Break(2.0% I ISO527) Conditioned |
|
|
Notched Impact Strength(125 0MPa I ISO527) Conditioned |
2mm/min |
|
Flexural Strength(175MPa 1ISO178) Conditioned |
2mm/min |
|
Flexural Modulus(5250 MPa I ISO178) Conditioned |
5mm/ min |
Thermal Property
|
Melting Point |
(220°C I ISO11357) |
|
Hot Deformation Temperature |
(175*C I ISO75) |
|
Conditioned |
|
|
Flammability Class |
(HB 1UL94) |
|
Conditioned |
mm |
Injection Molding Conditions
|
Drying Temperature |
130°C |
|
Drying Time |
3h |
|
Cylinder Temperature |
240-260°C |
|
Nozzle Temperature |
240-260*C |
|
Tooling Temperature |
80*C |
* Molding conditions arejustfor reference, please make an adjustment based on the actual situation！
Want to buy masterbatch, contact us.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Anmei-PA66 GF for Engineering Plastics | Anmei focuses on the production of modified engineering plastics. We have polyamide pa66modified products with properties of heat-resistant, rei... |
 |
PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics | PA66 GF15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection molding. PA66 GF15 Storage and Handling PRE-PROCESS... |
 |
PA66 GF30 Halogen-free FR (A2015F) for Engineering Plastics | Material pa6 6 gf 30FR is a PA66 with 30% glass-fibers and flame retardant free of halogens. This type of polyamide PA66 contains stabilization and... |
 |
PA6 GF20 Heat Stabilized (A1006D, A1016D) for Engineering Plastics | PA6 GF 20has 20% glass fiber filler. It has much greater heat-resistant mechanical properties than unfilled polyamide. Anmeiplastics has always bee... |
 |
Nylon66 PA66 Halogen-free FR (A2005X01) for Engineering Plastics | Nylon66 PA66FRHalogen-free FR (A2005X01) for Engineering Plastics Flame-retardant PA66 is a halogen-free flame retardant engineering plastic made ... |
Похожие товары
 |
COLMAST®CW1350 (БЕЛЫЙ МАСТЕРБАТЧ) | Продавец: ADC PLASTIC., JSC | COLMAST CW1350 является идеальным выбором благодаря выдающимся преимуществам и сочетанию с различ... |
 |
CALMAST®MN570 – ПП НАПОЛНИТЕЛЬ ИЗ КАРБОНАТА КАЛЬЦИЯ MASTERBATCH | Продавец: ADC PLASTIC., JSC | CALMAST MN570 — идеальный выбор, который поможет производителям пластиковых изделий оптимиз... |
 |
CALMAST®MF530 – ПП НАПОЛНИТЕЛЬ КАКБОНАТ КАЛЬЦИЯ MASTERBATCH | Продавец: ADC PLASTIC., JSC | CALMAST MF530 — идеальный выбор, который поможет производителям пластиковых изделий оптимиз... |
 |
PA6 GF30 Halogen-free FR (A1015F) for Engineering Plastics | Продавец: Suzhou Anmei Material Technology Co., Ltd | PA6 FRis a PA6 with 30% glass-fibers and flame retardant free of halogens. Typical Applicati... |
 |
PA6 GF30 Halogenated FR (A1014F) for Engineering Plastics | Продавец: Suzhou Anmei Material Technology Co., Ltd | PA6 GF 30 FRis a PA6 with 30% glass-fibers and halogens flame retardant. PA6 GF30 Halogenated ... |
