High Density Upper Sole PU Resin
ZG-P-8755/ZG-I-7118
Q/ZHTY 01—2013
Application: Low hardness, high density.
Characteristic: Suitable for shoes production.
Typical properties of pu resin
Name of products |
Appearance |
Viscosity(Pa·s/50℃) |
Density(g/cm3/40℃) |
Packge(kg) |
ZG-P-8755 |
White or pale yellow,liquid foreign material |
18 |
||
ZG-I-7118 |
Tranparent and pure liquid |
20 |
Reference shipments ratio: A/B=30 / 25(barrel)
Catalysts and auxiliary agents:
ZG-P-8755/ZG-AC-2/water/hardener=18kg/230g/70~90g/300-500g
Note: corresponding adjustment should be made to the addition of auxiliary agent at different areas, different environment and different production conditions.
Typical processing parameters& Typcal properties:
Reaction characteristics |
technical standards |
Test item |
Physical properties |
Reference ratioP+C/I |
100/88-92 |
Molded density(g/cm3) |
|
Material temperature(℃) |
A material: 40-45; B material: 38-42 |
Hardness(type C) |
70~80 |
Cream time(s) |
5~8 |
Tensile strength(kgf/cm) |
>10 |
End of Rise time(s) |
25~35 |
Elingation(%) |
350~500 |
Metal mold temperature(℃) |
45~55 |
DIN |
<200 |
Demould time(min) |
Free rise foam density(g/cm3) |
||
Folding resistance at room temperature |
>100000 times |
Folding(room temperature)(40,000 gap length mm) |
<8 |
With the best ratio is based on the ratio, the ratio of value added with The type and quantity of paint additives vary.
The free foam density according to the seasons (temperature, humidity) vary
Ejection time with the increase of the thickness of molded extension
Folding conditions: angle of 90 degrees of flex, frequency of 80 times / min * 4 million
Data listed above are just for reference. The detail data are subjected to practical operation. If other requests for physical properties, please contact us.
More information can view .
Отправить запрос, связаться с поставщиком
Другие товары поставщика
ZG-P-5080/ZG-I-5220 | ZG-P-5080/ZG-I-5220,Sole PU Resin For High-Heeled Shoes,Medium-Density Shoe Sole PU Resin Sole PU Resin For High-Heeled Shoes Medium-Density Shoe S... | |
Sandals Shoes Sole PU Resin | Medium and high-density PU Resin for shoe sole with the upper Characteristic: Medium and low hardness, medium density and feel good Applica... | |
China Medium Hardness Sole PU Resin | ZG-P-5005/ZG-I-5320 Medium and high-density PU Resin for shoe sole with the upper Characteristic: Medium and low hardness, medium and high densit... | |
ZG-P-5080/ZG-I-5220 | ZG-P-5080/ZG-I-5220 High-hardness and medium and high-density PU Resin for shoe sole of woman high-heeled shoes and gents business shoes Characte... | |
ZG-P-6570/ZG-I-5012 | ZG-P-6570/ZG-I-5012,, Dual density PU Resin for labor protection shoes (safety shoe) sole Characteristic: Medium and low hardness, medium and hig... |