Sweating Guarded Hot Plate Tester STD-AG48
Test Principle
Under standard test environment, heat the fixed aluminum or copper plate and keep a fixed temperature, test the heating power, then test the power of the same situation after covering the sample cloth, to get the hermal and evaporative of clothing material.
Feather
With a heat plate fully simulated human skin mechanism, Easy to clean.
Automatic water supply system, can ensure the stability of the water supply and does not leak do not require any adjustment.
Instrument can automatic adjustment of PID control parameters based on sample thickness to achieve the test conditions.
Wind speed continuously adjustable from 0-1.2m/s, to meet variety test standard for thermal resistance, wet resistance and heating performance test.
The width of the thermal protection ring is 127mm to ensure that the heat flow is transmitted only from the test sample
Can connect WIFI with computer.
Standards
GB/T11048. ISO11092. ASTMF1868-09. BS 8515. ASTM D 1518-2014. JIS L1096-2010. ASTM F 1868-02
Key Specification
|
Model |
STD-AG48 Sweating Guarded Hot Plate Tester |
|
Thermal resistance (RCT) range |
0.002~2.0 m2.K/W |
|
Wet resistance (RET) range |
0~1000 m2.Pa/W |
|
Test board temperature range |
30℃~40℃, adjust |
|
Temperatureprecision |
±0.03℃ |
|
Wind speed |
0-1.2m/s, continuous adjustable |
|
Wind speed precision |
±1% |
|
Test sample thickness |
0-50mm |
|
Test plate area |
254mm×254mm |
|
Sample area |
512mm×512mm |
|
Thermal ring width |
127mm |
|
Power supply |
AC220V, 50/60HZ |
|
Dimension |
73×61×35cm |
|
Weight |
60Kg |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Cleanliness Analysis System | Production： The cleanliness analysis system fully complies with the requirements of standards such as VDA19.1 - 2015. ISO16232. ISO4406. ISO4407. ... |
 |
Textile water evaporation rate tester | Standard: The design and operation of this tester are aligned with key international and national standards related to assessing the moisture mana... |
 |
Room Corner Test Machine, ISO 9705. En 14390 | Introduction According to ISO 9705 of building materials fire prevention performance standards, this machine control platform to provide independe... |
 |
Catheter Airflow Resistance Tester | Compliance Standards YY0461 - 2003. etc. Main Uses The catheter airflow resistance tester is an important tool for evaluating the resistance of ... |
 |
Needle Flame Tester | Standard GB/T 5169.5: Electrical & Electronic Equipment – Needle Flame Test Method IEC 60695-11-5/IEC 60695-2-2: Fire Hazard Testing &n... |
Похожие товары
 |
Steaming Cylinder | Продавец: Standard International Group (HK) Limited | Standards ISO 3005. BS 4323. NEXT TM 15. M&S P8. IWTO 29-76 Applications: Used for steamin... |
 |
Drill Flocking Performance Tester丨Drill Flocking Performance Test mechine | Продавец: Standard International Group (HK) Limited | Standards GB/T 12705.1/14272. BS EN 12132-1 Applications To determine the ability of penetrati... |
 |
Wrinkle Recovery Tester 丨Wrinkle Recovery Test mechine | Продавец: Standard International Group (HK) Limited | Standards AATCC 128, ISO 9867, ENKA 3061 Applications AATCC Wrinkle Recovery Tester is used to... |
 |
Button Impact Tester丨Button Impact Test mechine | Продавец: Standard International Group (HK) Limited | Standards ASTM D5171 Applications Button Impact Tester is used to determine the impact resista... |
 |
AATCC Viewing Board丨AATCC Viewing Board tester | Продавец: Standard International Group (HK) Limited | Standards Built to American Association of Textile Chemists and Colorist (AATCC) approved test m... |
