Universal Abrasion Resistance Tester

• 

Whats/App: +86 156 1874 6768

Web: standard-groups.com

TheUniversal Abrasion Resistance Testercan be used to flat grinding, mill grinding, edge grinding, folding grinding and anti-frost, edge-close and fleeceand other wear-resistant test, can be used for woven fabrics, knitted fabrics, coated fabrics, fleece fabrics, socks, knitted fabrics, knitted fabrics, felt, nonwoven, deep fabric, yarn, cord plastic film, rubber, leather, paper, and many other materials. The test sample may be dry or immersed in water, oil, or other liquids.

The instrument is mainly composed of control system and friction system. The sample is installed on the clamp and is tightened. The upper fixture with the sandpaper is going down, adjust the position of the weight so that the sandpaper in contact with sample surface, through the control system set the number of friction times of the sample, and start the instrument. The lower fixture base does front-to-backmotion, so that the sample and sandpaper being rubbed against each other. When the number of times the movements reach the set value, the instrument stops and remove the sample to observe the degree of wear.

Suitable for testing all kinds of fabrics, including wear performance and wear resistance of clothing, shoes and industrial textiles.

Standards

ASTM D3514/D3885/D3886.AATCC 119/120.FTMS 191/5300/5302.FORD EFB 15J2/BN 112-01

Accessories

Frosted accessories

Cloth edge and fold between the friction sample

Elastic friction pad

Abrasive 50 yards / roll

3 rating cards for ASTM D3514

Technical Parameters

The test runs in automatic mode, ensuring both accurate of the test results with repeatability and eliminating the need for the operator to evaluate the test results;

The advanced gripping device ensures constant sample tension;

With a flat-grinding test head (inflatable membrane type of wear test method) and a mill-grinding test head and the required weight and the initial abrasive;

Built-in timer and mechanical cycle counter;

The machine with a reciprocating table, flat grinding / mill grinding test head mounted on top;

Clamping ring inner diameter: 94 mm;

Lock ring height: ≤9.5 mm;

Speed: 120 ± 15/min;

Moving: 25 mm;

Air pressure: 62 kPa (9 psi);

Dimensions: 330 × 500 × 460mm (length × width × height);

Weight: 33kg (72lb);

Power: 120/230 V, 50/60 Hz, 2A / 1A.

Другие товары поставщика

	Particle Strength Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Particle Strength Tester is a high-precision instrument designed to measure the mechani...
	Automatic pneumatic foam fatigue testing equipment	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The HD2 Pneumatic Foam Fatigue Tester complies with or references the following ...
	New Energy Battery Air Tightness Leak Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The New Energy Battery Air Tightness Leak Tester is an advanced intelligent detection syste...
	Reciprocating Friction and Wear Testing Machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applicable Standards ASTM Standards: Formulated by the American Society for Testing and Ma...
	Infusion device Leakage negative pressure tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Infusion Device Leakage Negative Pressure Tester is designed to evaluate the airtightne...

Похожие товары

	Steaming Cylinder	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO 3005. BS 4323. NEXT TM 15....
	Drill Flocking Performance Tester丨Drill Flocking Performance Test mechine	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 12705.1/14272. BS EN 1213...
	Wrinkle Recovery Tester 丨Wrinkle Recovery Test mechine	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards AATCC 128, ISO 9867, ENKA 3061...
	Button Impact Tester丨Button Impact Test mechine	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM D5171 Applications Butt...
	AATCC Viewing Board丨AATCC Viewing Board tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards Built to American Association ...