Rubber low temperature brittleness testing machine
Product Introduction:
Plastic low temperature embrittlement testing machine is to determine the temperature of rubber and plastic when the sample is damaged by impact under specified conditions, that is, the brittleness temperature, which can make comparative identification of the performance of non-rigid plastics and other elastic materials under low temperature conditions, and the advantages and shortcomings of temperature and low temperature performance. Therefore, both in scientific research materials and production process control are indispensable. This instrument is according to GB/T 15256 and GB/T5470 standard design, the development of compressor refrigeration equipment. The equipment adopts the cascade compressor refrigeration technology, the heat balance principle and the circulation stirring method to achieve automatic uniform cooling and constant temperature of the sample. This equipment is divided into rubber low temperature brittleness testing machine and plastic low temperature brittleness testing machine two kinds.
Technical parameter:
1. temperature control range: -80℃ (room temperature ≤25℃) (there are -60. -70. -80℃ three models for customers to choose)
2. cooling speed:
0 ℃ —— 1.2 ℃ —— 20 ℃ / min
- 20 ℃ —— 1.0 ℃ to 30 ℃ / min
- 30 ℃ —— 0.7 ℃ to 60 ℃ / min
-40℃——-60℃ about 0.7℃/min
-60℃——-80℃ About 0.5℃/min
Note: The use environment is used at room temperature (23-25 ℃)， and the effect of diffusing temperature of the compressor is maintained during work. The side door can be fully opened.
3. after constant temperature, the temperature fluctuation within 3 minutes of the test: < ±0.5℃
4. overall size: 900×505×800mm (length × width × height)
5. the overall size of the studio: 220×170×70mm (length × width × height)
6. cooling medium: ethanol or other non-freezing liquid
7. mixing motor: 15W
8. working power supply 220V——240V,50Hz,2kW
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Metal Corrosion Rate Measurement Device | standards GB/T 15970 ISO 7539 ASTM G31 GB/T 10125 Scope of Application The metal corrosivity tester is designed and manufactured in line with... |
 |
Finger Tactile Tester Sensor | Finger Tactile Sensor is a "sensor that measures natural finger operations"with a built-in contact force sensor and a 3-axis acceleration sensor. ... |
 |
Full Notch Creep meter | Standard ISO 16770: Exclusively designed for full-notch creep testing (FNCT) of thermoplastics under sustained stress. ASTM D2990: Configurable f... |
 |
High temperature vacum friction & wear tester | The working principle of a high-temperature vacuum friction and wear testing machine is to simulate the friction and wear behavior of materials u... |
 |
Thrust Bearing Rolling Friction and Wear Testing Machine | Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates Real-World Conditions: Allows testing under contro... |
Похожие товары
 |
G631A electric shoe stripping testing machine | Продавец: Standard International Group (HK) Limited | Product Introduction: Upper peeling strength tester is suitable for testing the peeling strength... |
 |
G645 leather shoe hook stiffness testing machine | Продавец: Standard International Group (HK) Limited | Product Introduction: Leather shoe hook stiffness tester is suitable for measuring the longitudi... |
 |
G651 national standard shoe bending tester | Продавец: Standard International Group (HK) Limited | Product Introduction: National standard shoe bending testing machine is specialized in testing f... |
 |
G664 fibreboard bending testing machine | Продавец: Standard International Group (HK) Limited | Product Introduction: G664 mid-sole fiberboard zigzag testing machine Test leather shoes and c... |
 |
G678W-L cold resistance testing machine for shoes | Продавец: Standard International Group (HK) Limited | Product Introduction: Shoes cold resistance testing machine is used to test finished shoes, rubb... |
