.

ROSS zigzag tester

Product Introduction:

The ROSS zigzag resistance tester installed the sole strip test piece on the ROSS zigzag test machine, so that the cut is directly above the center of the rotating shaft of the ROSS zigzag test machine, and drove the test piece to perform free 90-degree zigzag on the shaft through the ROSS zigzag test machine. After a certain number of tests, the length of the test piece incision is measured. The zigzag resistance of the test piece was evaluated by the size of the notch growth rate.

Reference standard:

GB/T2099-2007. ASTM-D1052. ISO-5423. SATRA TM60. HB-T2411HG/ T2411 and other standards

Technical parameters:

1. simultaneous measurement: (12 test pieces)

2. bending Angle: 90±2º

3. speed: 0-100r/min can be switched.

4. controller: LED-SLD806 integrated display control function

5. hole punch: 2.5mm

6. Test mode; Automatic stop when the test time is reached

7. fixture features: can test the sole at the same time can test pieces

8. zigzag shaft diameter: 10mm.

9. sample method: sole test piece

10. sample size: 152×25mm

11. Power supply: AC220V,10A

Random configuration:

1. One machine

2. 1 knife die

3. One power cable

4. One cutting knife

5. One copy of instructions

6. One delivery note


Отправить запрос, связаться с поставщиком

Кому: Standard International Group (HK) Limited
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Thermal cycle wet freezing testing machine
Thermal cycle wet freezing testing machine Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval UL 1073: Standard for Safety for Enclosu...
Large-Area 3D Optical Surface Profilometer
Large-Area 3D Optical Surface Profilometer Large-Area 3D Optical Surface Profilometer is a high-performance three-dimensional optical metrology system designed for large-area surface topogra...
Glass Scratch/Abrasion Tester
Glass Scratch/Abrasion Tester The Glass Scratch/Abrasion Tester is used to test the scratch and abrasion resistance of glass. This instrument uses a counter to set the number of...
Photovoltaic module outdoor exposure test system
Photovoltaic module outdoor exposure test system Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61730: Photovoltaic (PV) Module Safe...
Cleanliness automatic extractor
Cleanliness automatic extractor Component Cleanliness Cabinet equipped with cleaning modes such as pressure jet cleaning, perfusion cleaning, spray cleaning, etc., the cleaning ag...
Все товары поставщика

Похожие товары

G631A electric shoe stripping testing machine
G631A electric shoe stripping testing machine Продавец: Standard International Group (HK) Limited Product Introduction: Upper peeling strength tester is suitable for testing the peeling strength...
G645 leather shoe hook stiffness testing machine
G645 leather shoe hook stiffness testing machine Продавец: Standard International Group (HK) Limited Product Introduction: Leather shoe hook stiffness tester is suitable for measuring the longitudi...
G651 national standard shoe bending tester
G651 national standard shoe bending tester Продавец: Standard International Group (HK) Limited Product Introduction: National standard shoe bending testing machine is specialized in testing f...
G664 fibreboard bending testing machine
G664 fibreboard bending testing machine Продавец: Standard International Group (HK) Limited Product Introduction: G664 mid-sole fiberboard zigzag testing machine Test leather shoes and c...
G678W-L cold resistance testing machine for shoes
G678W-L cold resistance testing machine for shoes Продавец: Standard International Group (HK) Limited Product Introduction: Shoes cold resistance testing machine is used to test finished shoes, rubb...