Heavy Hex Nuts

DATIAN (DT) Fastener is famous for producing quality heavy hex nuts. We, a professional heavy hex nuts factory, have a in house full line heat treatment machine used to improve the hardness and mechanical properties of heavy hexagonal nuts in order to serve different high requirement areas. The heavy duty hex nuts standard we listed below are most ASTM A194/A563 and ANSI/ASME B18.2.2 heavy hex nuts. Compare to finished hex nuts, the heavy hex nut carry higher grade and slightly wider and thicker diameters to meet the greater length of thread engagement and better resistance to stretching or widening. Contact DT Fastener, a professional nuts and bolts manufacturing company, for more info now!

Heavy Hex Nuts For Sale

Searching for The Right Heavy Duty Hex Nuts

ASME B 18.2.6 Heavy Hex Nuts (ASTM A563/ A194/ A194M): 2H, 2HM, 7, 7L, 7M, 8/8A, DH, 8S, 10S,10,12

ANSI/ASME B18.2.2 Heavy Hex Nuts

Heavy Hex vs Hex

The first thing to declare is that both heavy hex nuts and finished hex nuts belong to the hexagon nut classification. Simply put, the difference between them is that heavy hex nuts have larger widths across the flats and heights of the same nominal size. This gives heavy hex nuts higher load retention and tensile strength. This also explains why heavy hex nuts can be heat treated to achieve higher hardness.

Heavy Hexagonal Nut Dimensions

Legend:	Making
P=pitch	Carbon Steel:2H,2HM,7
K=height of the nut	7L,8,8M,8S,10S,12
D=the nominal diameter of the thread	Thread:UNC, UNF
E=The length of the diagonal	Surface:BLK,ZP,HDG,etc
S=The length of the flat

Datian Heavy Hex Nuts Production Process

There are two production processes for Datian Fastener's Heavy hexagon nuts - cold heading and hot heading.

The cold heading machine of Datian Fastener has the ability to form the nut from raw material to finished product at one time. Our cold heading machine integrates the rolling thread machine and the cold heading machine to maximize efficiency, ensure the customer's delivery requirements, and minimize the labor cost, which makes the price of our heavy hexagonal nut competitive all over the world.

Hot forming: Generally, hot forming is selected for larger fasteners, and the diameter range are generally 1''~4''~(M30~M100) or even larger. The material used in the hot heading machine is generally round steel, without cold drawing and pickling. The production step is to cut the material first, and then upsetting by the punch. The surface of the semi-finished product of red punching is rougher than that of cold heading. After tapping, the two sides of the nut are chamfered with a CNC machine, and finally it is completed after heat treatment and surface treatment.

Cold heading and hot heading are roughly divided into the following steps: Cold heading: wire drawing - cold heading - (heat treatment) - tapping - surface treatment

Hot forming: cutting material - red punching - chamfering - turning - (heat treatment) - tapping - surface treatment Or cutting material - upsetting ball - annealing, phosphating - forming - punching - (heat treatment) - tapping - surface treatment.

Heavy Hex Nuts FAQs



Why use a heavy hex bolt nut?

Heavy hex nuts have larger opposite sides and are thicker. In the fastener manufacturing industry, general hardware fasteners are used in normal temperature, normal pressure, and non-strong corrosive media, and each fastener will be subjected to different loads during use.

What grade are heavy hex nuts?

2H, 2HM, 7,7L 7M, 4，4L,6 8/8A, 8C/8CA, 8M/8MA, 8T/T8TA

ASTM A563/A563M Heavy Hex Nuts: DH, A, C, 8S, 10S, 10, 12

As one of hex nut manufacturers, we will do our best to meet all the needs of customers.

Другие товары поставщика

	DIN 557/562 Square Nuts	Din 557 square nut/562 square nut is a steel fastening device screwed on a steel bolt-on on all four sides. The square nut uses a special wrench to...
	AS 1252 STRUCTURE NUTS: Class 8, 10	AS 1252 STRUCTURE NUTS: Class 8, 10 DATIAN Fastener provides quality AS 1252 structural nuts at competitive prices. In recent years, Australian st...
	DIN 314 Wing Nuts	DIN 314 big wing nuts is easy to install and disassemble, and it can be screwed directly by hand, so some people also call it a hand-tightened nut....
	DIN EN 1663 Lock Nuts	The superior anti-vibration performance of the DIN EN 1663lock nut: when the thread is tightened, the crest thread of the bolt tightly enters the 3...
	Heavy Hex Nuts	DATIAN (DT) Fastener is famous for producing quality heavy hex nuts. We, a professional heavy hex nuts factory, have a in house full line heat trea...

Все товары поставщика

Похожие товары

	Aluminium Cutting Saw Blade	Продавец: SHIJIAZHUANG JINGHANG TRADE CO., LTD.	Size:305*3.2*2.2*25.4/30*120T Application:To cut solid drawn products with a thickness between 2...
	Panel Sizing Saw Blade	Продавец: SHIJIAZHUANG JINGHANG TRADE CO., LTD.	Size Options: Application: Designed to precisely size single or multiple panels. Ideal fo...
	Multi-piece Wood Saw Blade 455mm	Продавец: SHIJIAZHUANG JINGHANG TRADE CO., LTD.	Size:455*3.6*3.0*50/60/70*44+6T Application:Continuous cutting and slitting operations Material...
	Aluminium Cutting Saw Blade 450mm	Продавец: SHIJIAZHUANG JINGHANG TRADE CO., LTD.	Size：450*4.0*3.2*30*120T Application：Cross-cutting section processing of aluminum ingots/aluminu...
	Single Scoring Saw Blade	Продавец: SHIJIAZHUANG JINGHANG TRADE CO., LTD.	Size:120*3.0/4.0*2.2*20/22*24T Application:Single-sided chamfering cutting, suitable for pre-tre...