Spray Foam Gun

Spray foam gun

In the process of spraying materials, spray foam gun is essential. The spray foam gun needs to mix the material quickly during the spraying process, which needs to be done at a very fast speed, because the bonded material begins to harden immediately. Therefore, no material can be retained in the foam gun for a long time. Excess material needs to be removed from the best spray foam gunduring the purging process.

Features of spray gun foam

Spray foam guns are important to the process of applying sprayed materials. They can mix the materials during the spraying process, which ensures high efficiency and prevents the combined materials from hardening due to remaining in the spray foam gun for a long time.

Advantages of spray foam gun

-lightweight;

-body made of aluminum with a metal trigger;

-great precision;

-flow control mechanism;

Spray foam gun provided by Zego spray gun factory has access to hard-to-reach areas. It also has large flow control knob, which secures the overall system. Besides, the nozzle is replaceable. The excellent design can prevent dripping.

Tips of spray foam gun

If you take care of it, it is a good tool. Follow the tips below:

-Protect the tip. Do not damage it. If you do not protect it carefully, it will begin to clog or leak.

-Wipe the tip after using. Avoid foam on the tip.

-If you use this upside down (can facing down) it will work for about 3 seconds and then start spraying gas only. This will make the can last a lot shorter and you will cause it to dribble and make it a pain in the butt to use.

Spray foam gun common fault and solutions

-Air bubbles appear in the gun pot

Cause 1：Spray gun nozzle set is not tightly installed

Result: Air enters the paint channel and bubbles appear in the gun pot when spraying.

Solution: Tighten the nozzle.

Cause 2: Blockage behind the nozzle

Result: Paint residue prevents the nozzle from sealing 100% with the air diverter ring.

Solution: Clean the nozzle carefully.

Cause 3: Damage to the surface of the air diverter ring

Result: Air entered the paint channel due to improper disassembly.

Solution: Replace the air diverter ring.

Cause 4: Clogging of gun pot venting hole

Result: Due to the vacuum, air will be sucked into the paint channel and bubbles will appear first and then the paint will leak.

Solution: Clean the gun pot vent hole and replace the gun pot if necessary.

As a professional spray gun factory, ZEGO has high-quality spray gun kit for sale. Welcome to contact us if needed.

Другие товары поставщика

	NOZZLE SET	How to choose the spray gun nozzle set? For different types of coatings, there are three main factors to consider when choosing the aperture of th...
	TIRE INFLATING GUN	Description of Air Gun Tire Inflator If you have a car, you must prepare an air best tire inflation gunon your vehicle. Air inflating gun will ens...
	CLEAR COAT SPRAY GUN	Description of Clear Coat Spray Gun ZEGO best clear coat spray gunprovides better and effective protection from paint, primer and frames from the ...
	AIR DUSTER GUN	Air duster gun ZEGO provides high quality air compressor duster gunfor blow-off drying for engine block, cutting chips, coating powder and dust on...
	HVLP SPRAY GUN	Founded by talented engineer Mr. Rifu Zheng in 2011, ZEGO are China-based that spray gun manufacturersprofessional auto refinishing and industrial ...

Все товары поставщика

Похожие товары

	NOZZLE SET	Продавец: TAIZHOU TOOL-BAR MACHINERY CO.,LTD.	How to choose the paint sprayer extension nozzleset? For different types of coatings, there are ...
	INDUSTRIAL SPRAY GUN	Продавец: TAIZHOU TOOL-BAR MACHINERY CO.,LTD.	The industrial spray gunis specifically designed for automotive body and industrial work, providi...
	CLEANING KIT	Продавец: TAIZHOU TOOL-BAR MACHINERY CO.,LTD.	As one of the most professional spray gun suppliers, we provide automotive spray gun, spray gun k...
	CAR PAINT SPRAY GUN	Продавец: TAIZHOU TOOL-BAR MACHINERY CO.,LTD.	Founded in 2011, ZEGO Tool-bar upholds the production of professional industrial paint spraying t...
	BEST AUTO PAINT SPRAY GUN KIT TH201AG	Продавец: TAIZHOU TOOL-BAR MACHINERY CO.,LTD.	HVLP/MP/HP All climates Gravity feed No o-ring design Left-hand friendly High-grade S.S tip ...