Famous Brand 110kVA Cummins Gas Generator in Super Silent Type with Water Cooling
Specifications:
| GAS ENGINE SPECIFICATION | |||||||
| Engine Brand | Cummins (Convert to gas engine from Cummins diesel engine) | ||||||
| Engine Model | AB5.9G-G100 | ||||||
| Cylinder Nos. | 6 Cylinder in Line | ||||||
| Aspiration | Turbocharged & Aftercooled | ||||||
| Cooling Method | Water Cooling | ||||||
| Fuel | Natural Gas | ||||||
| Governor | ECU | ||||||
| Engine Max. Output at rate 1500R.P.M. | kWm | 100.0 | |||||
| BHP | 133.0 | ||||||
| Displacement | Liters | 5.9 | |||||
| Engine Speed | R.P.M. | 1500 | |||||
| Bore | mm | 102 | |||||
| Stroke | mm | 120 | |||||
| Fuel Comsunption at 100% load | M3/Hr | 27 | |||||
| Oil Pan Capacity | Liters | 14 | |||||
| Natural Gas Pressure | kPa | ≥3kPa | |||||
| Compression Ratio | 10.5 : 1 | ||||||
| ALTERNATOR SPECIFICATION | |||||||
| Manufacturer | Cummins Generator Technologies | ||||||
| Alternator Brand | Stamford | ||||||
| Model | UCI 274 C | ||||||
| Rate Output | kVA | 100 | |||||
| Rate Frequency | Hz | 50 | |||||
| Altitude | M | ≤1000 | |||||
| Alternator Type | Single bearing, brushless type | ||||||
| Connection Type | Three phase, four wire | ||||||
| Protection Grade | IP23 | ||||||
| Insulation Class | H | ||||||
| Voltage Regulation | AVR (model AS440) | ||||||
| Standards | Compliance with GB755, BS5000, NEMA MG1-22, IEC-34, CSA C22-100 and AS1259 Standards. | ||||||
| Alternator for choice | Brand | Leroy Somer | Marathon | APT Power | Mecc Alte | ||
| Model | LSA 44.3S5 | MP-80-4 | ASF274C | ECP34-2S/4A | |||
Products Advantages
1. High quality,reliable and complete power unit.
2. Compact design.
3. Easy start and maintenance start.
4. All generator sets are gone through rigorous testing before being released to the market place, including 50% load, 75% load, 100% load, 110% load and all protection function (low oil pressure, high water temperature, over speed, over load).
5. Fully engineered with a wide range of options and accessories.
2. Compact design.
3. Easy start and maintenance start.
4. All generator sets are gone through rigorous testing before being released to the market place, including 50% load, 75% load, 100% load, 110% load and all protection function (low oil pressure, high water temperature, over speed, over load).
5. Fully engineered with a wide range of options and accessories.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
| 138kVA Lovol Diesel Generator Open Type/ Silent/ Super Slient Optional with ISO | Introduction: A Series Lovol diesel generators are made up of Lovol engines (produced by Tianjin Lovol Engines Co., Ltd.) and Stamford alternato... | |
| Famous Japanese Brand 14kVA Kubota Diesel Generator Set with Soundproof and Water Cooling | Company Profile:Fuzhou APT Power Co., Ltd is a comprehensive company. The company focuses its business on diesel generator, developing, producing a... | |
| 124kVA Famous Brand Perkins Diesel Generator with Soundproof in Water Cooling and ISO 9001 | Introduction: APT Perkins Series Diesel Generator A series Perkins diesel generator are made up of Perkins engine with Stamford alternators (pr... | |
| 11kVA Silent Quanchai Diesel Generator with ISO Famous Chinese Brand for Diesel Generator | Introduction: A Series Quanchai brand diesel engine generators are made up of Quanchai diesel engine (Produced by Anhui Quanchai Engine Co., Ltd... | |
| 495kVA Super Slient or Open Type Cummins Diesel Generator in Water Cooling with ISO | Introduction:A Series Cummins diesel generator set are made up of Cummins engines Chongqing Cummins Engine Co., Ltd and Stamford alternators produc... |
Похожие товары
| Sunkaier Vertical Powder Dryer | Продавец: Jiangsu Sunkaier Industrial Technology Co., Ltd. | Sunkaier Vertical Powder Dryer Vertical Cone Dryer Outline: Sunkaier vertical powder dr... | |
| Лист рекристаллизованного карбида кремния | Продавец: Карбидокремниевая техническая керамика | При тех же условиях работы толщина может быть меньше, а рабочая температура может достигать 1700 ... | |
| Custom Black ABS Resin CNC Machining Parts Plastic Prototypes | Продавец: GUANGDONG SHUNDE TEAMWORK MODEL TECHNOLOGY CO., LTD | Batch production: Low volume production; Precision:High precision; Leading time: 3-5 days; C... | |
| Rapid Prototyping Service | Продавец: Ньюэй Пресижн Воркс Лтд. | Реализуйте свои инновационные идеи с помощью нашей услуги быстрого прототипирования. Мы специал... | |
| Custom Sheet Metal Products Fabrication | Продавец: Ньюэй Пресижн Воркс Лтд. | Наша опытная команда экспертов предоставляет услуги по изготовлению изделий из листового металл... |


















