.

Rail Tie Plates for concert sleeper

A tie plate is also called a baseplate or sole plate. Ruika specializes in producing rail fastening and tie plate is one of our main products. Rail tie plate is used in rail construction to support the rails. We can offer rail tie plate made using either casting iron or casting steel for customers to choose from, depending on the load and the type of rails. Boltable as well asrail clipscan be applied. For the discontinuous type of support, we supply various ribbed tie plate which are also produced in casting iron or casting steel.

Tie plates are generally used to take the load of rail and distribute the load to the sleepers offering proven economies. We manufacture all types of base plates suitable for various rail sections, for use on wooden, steel or concrete sleepers and ballast-less tracks used with elastic fastenings on wooden sleepers and 'K' type fastening system.
Rail Tie Plates (1).jpgRail Tie Plates (2).jpgRail Tie Plates (1).png

Product name

Type

Process

Material

Railroad Tie Fasteners

Single Shoulder

Rolled,Forging,Casting

QT450-10,20#,35#,etc

Railroad Tie Fasteners

Double Shoulder

Rolled,Forging,Casting

QT450-10,20#,35#,etc

Railroad Tie Fasteners

No Shoulder

Rolled,Forging,Casting

QT450-10,20#,35#,etc

Other kinds of baseplate are also available according to your drawings or samples!


Tie plate or sole plates are needed in rail installation, as they not only support the rails, but also enable the entire fastening system to be fixed on. Rail tie plates are the uppermost component of a crane rail or track support system. The primary function of a tie plate or sole plate is to provide the rail with a flat, smooth resting surface while allowing for vertical alignment of the rail system. Tie plates are secured by Anchor Bolts, also known as Holding Down Bolts. Soleplates are typically installed with a layer of grout cast beneath, which fills the void between the soleplate and the concrete foundation.

The holes for bolting the anchor and leveling bolts, and holes for bolt through clips if present, are precisely drilled into the sole plates. For weldable clips and base clips, the bottom of the clip is welded onto the sole plates before galvanizing.

Cast iron can be the welded or fabricated type, depending upon the customers requirements. Our rail tie plate can be made to suit various rail section, i.e. UIC 60, UIC 54, RN 45, 90 A, etc.
Rail Tie Plates (3).jpgRail Tie Plates (4).jpg
At our production base for the tie plates, various types are available following standards of AREMA, UIC, BS and others, with either single shoulder plates or double shoulder plates according to customers’ requirements.

For the processing way, casting used to be most popular for both China and abroad. However, in recent years, rolling technology is rising up to produce tie plates in China, due to increasing such orders from international clients, especially America and Canada. Our company is the first company in China to try rolling processing onto baseplate production, based on our available rolling steel expertise, used for rail joint bar and gauge blocks. Up to now, we have successfully made out dies for rail tie plates for 11inches, 14inches and 14-3/4inch for both 5-1/2 and 6inch rail bases. Some more varieties are under negotiation with the clients as well. Based on this, we received 3 orders for rolling tie plates with total weight over 3,000tons.
Rail Baseplates (1).jpg

Rail Baseplates (4).jpg

Production Processs

Of course, tie plate production by casting and forging are also available at our company.

Types of railway tie plates we produce vary from 2holes, 4holes, 5holes, 6holes, and 8holes.
111.JPG222.JPG

Size: 10-15inch long, for rails of 90RA-A, 100RE, 115-119RE, 132-136RE
Material: Low carbon steel/high carbon steel, equivalent of customers’ required materials.
Standard: AREMA
Processing way: casting, forging or rolling

Size: for UIC60, UIC54, S48 rails
Material: Low carbon steel, high carbon steel, casting iron.
Standard: UIC864-6
Processing way: casting, forging or rolling

Size: for 50kg/30kg/37kg rails
Material: QT450-10 or other low carbon steel
Standard: GB, JIS E1110
Processing way: casting, forging or rolling

Size: P50
Material: Material: QT450-10 or other low carbon steel
Processing way: casting, forging or rollingRail Baseplates (2).jpgRail Baseplates (3).jpg

Adhering to our quality first policy, Ruika pays great attention to quality control management on our tie plate. We have been granted ISO9001-2008 certificates and have received the production license of China's Railway Ministry on railway products. We have a full set of inspection instruments to ensure all our rail tie plates are of high quality and up to customers' requirements.

Factory VisitingOur People

Packaging & Shipping

Packing

Our Services

As a leading manufacturer of rail fastening based in China, Ruika also produces many other railway fasteners, such as track bolt, sleeper screw, rail joint bar, rail anchor, rail clip, elastic rail clip, SKL tension clamp, rail shoulder, and so on.

Certifications

Certifications

FAQ
Q: Are you trading company or manufacturer ?
A: We are a factory.

Q: How long is your delivery time?
A: Generally within 25-30 days for a 20ft container after the prepayment received.

Q: What is your terms of payment ?
A: 30% of the payment in advance , the balance before shippment via T/T.

Q: Will that be possible for us to receive pieces of samples for approval?
A: Sure. The samples can be supplied for free but the freight counts on you.

Q: What's the packing way?
A: Bundled in steel strips with iron/wood pallets.

Q: How long will it be the quotation valid?
A: The validity is 15 days in general, but also depends on the quantity and special conditions. It will be shown in every quotation.

Q: What is MOQ?
A: 20’’ container in general, depending on whether enough stocks available for small quantity; customized products accepted.

Q: Do you have any certifications regarding rail tie plates?
A: We have passed the certification of CRCC in China and ISO9001:2008 overseas. Before shipment, Certificate of Quality can be supplied. We also accept Third Party Inspection from clients, with free samples to supply.
Contact us

If you have any questions, pls feel free to contact us as below:


Web:

Email:



Отправить запрос, связаться с поставщиком

Кому: MAANSHAN LEOMON ENERGY-SAVING TECHNOLOGY CO. LTD
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Din Crane Rail Clips
Din Crane Rail Clips The rail elastic clips (also called rail clip, elastic rail clip )are used with railway sleeper to fasten rails on both sides. The rail clips are...
Fastening railway supplies rail clamps crane rail clip from China
Fastening railway supplies rail clamps crane rail clip from China Ruika metal is one stop service for design, production, logistic delivery for metal products. Professional and experienced technical and marketing ...
Railway Wheels Forged  Casting Steel Train Wheel Rail Wheel
Railway Wheels Forged Casting Steel Train Wheel Rail Wheel Widely used in logistics, freight wagon, muck car, and other railway transport. It can be designed and manufactured according to user’s req...
Hot Sale Railroad Dog Spikes for Rail Sleeper
Hot Sale Railroad Dog Spikes for Rail Sleeper Rail spike, also known as a cut spike or crampon, is a large nail which is used to fix rails fastening system to railroad in the track. The main ...
Rail Tie Plates for concert sleeper
Rail Tie Plates for concert sleeper A tie plate is also called a baseplate or sole plate. Ruika specializes in producing rail fastening and tie plate is one of our main products. Ra...
Все товары поставщика

Похожие товары

Marine nozzleMarine nozzle7×0.25×140  CH 18/22,3D6,3D12 9×0.35×150 CH 25/34
Marine nozzleMarine nozzle7×0.25×140 CH 18/22,3D6,3D12 9×0.35×150 CH 25/34 Продавец: Sihong Tangni Engine Parts Co., Ltd. Our factory sell marine nozzle, plunger,injector,valve,etc,which used for the vessel and agricult...
Marine plungerLT10 (10mm)327-07-1 NVD26  (16mm) L.R
Marine plungerLT10 (10mm)327-07-1 NVD26 (16mm) L.R Продавец: Sihong Tangni Engine Parts Co., Ltd. Our factory sell marine nozzle, plunger,injector,valve,etc,which used for the vessel and agricult...
Стоимость логистической линии Китай-Россия
Стоимость логистической линии Китай-Россия Продавец: Карго NJK1029 китайско - российских логистики Цена перевозки(под ключ), цена меняется в зависимости от изменения плотности, и цена регулярно об...
доставка Китае-Россия
доставка Китае-Россия Продавец: Карго NJK1029 китайско - российских логистики Галантерея, одежда, электроприборы, автозапчасти, оборудование и др.
Marine plunger    NVD48A2U (23mm)R,NVD48 (20mm) L.R
Marine plunger NVD48A2U (23mm)R,NVD48 (20mm) L.R Продавец: Sihong Tangni Engine Parts Co., Ltd. Our factory sell marine nozzle, plunger,injector,valve,etc,which used for the vessel and agricult...