Ship Inflatable Floating Pneumatic Fender For Malaysia Market
Introduction ofShip Inflatable Floating Pneumatic Fender For Malaysia Market
Floating pneumatic fenders have been in use for around 50 years.It is the leading anti-collision device for marine application in the world. The compressed air filled rubber fender is used as a protective medium for ship-to-ship, ship to quay and ship-to -berthing.
Floating pneumatic fenders can be delivered in various sizes and types. Chain and tyre net(CTN) type is usually recommend to protect the fender body, but sling type or body only is also available.
Florescence brand Pneumatic Rubber Fender are exported to many countries like Vietnam, America, Denmark, Finland, Indonesia, Singapore, Philippines, France and more. High product quality and reasonable costing drives their adoption in the global market and are increasingly preferred as the most popular replacement to Yokohama fenders.
Structure of floating pneumatic fender
Floating pneumatic fender consists of an outer rubber, reinforcement synthetic-tyre-cord layer, and inner rubber, vulcanized together firmly.
1. The outer rubbers are used to protect the cord layers and inner rubber from abrasion and other external forces. This rubber compound have sufficient tensile and tear resistance strength to withstand anticipated weather conditions and severe usage.
2. The reinforcement synthetic-tyre-cord layer strong enough to maintain the internal air pressure of the fender.
3. The inner rubber layer seals the pressurized air inside the fender.
4. Fenders of diameter 2500mm and larger equipped with safety valve for releasing excess internal pressure when the fenders are over-compressed accidentally.
Operation of floating pneumatic fender
Logistic supply operation and / or marine salvage of naval fleet; For large tankers,normally 4-6 sets of pneumatic rubber fenders are hanged at the water line of the shipside. A hanging example of fenders is shown in the figure right.When 4 fenders are used,2 sets are placed at the front and 2 sets at the rear,they are all large scale fenders.In case 6 fenders are hanged on the ship side,1 small fender will be placed at ship bow and another small fender at ship stern.
When fenders are not used,they should be craned to the deck and placed on the anti-rolling seats.
In recent years,there is a new upsurge of wharf and port building.Because of the super large ships,the berthing collision energy is multiplied.Due to the low energy absorption and large reaction force of previous rubber fenders at the wharf, The ship side and docks usually may be damaged.The low compression reaction force property of pneumatic rubber fender conforms to the dock construction light-weighting trend and protects the ship side from damage as well.Therefore,Florescence Pneumatic rubber fenders are widely used in large-scale docks,wharves and offshore platforms.
Floating pneumatic fender use matters needing attention
1 Pneumatic pressure control in±5% of the rated pressure
2 Test pressure normally, add pressure in a timely manner
3 Avoid contact with sharp objects
4 When Long time not need, should wash to dry, filled with right amount of compressed air, placed in a cool dry ventilated place.
5 Storage place away from heat, acid and alkali, oil and grease
6 When store, shall not be folded and piled up
Application of floating pneumatic fender
Ship to ship transfers at seas.
Double banking operation as well as vessel to berth at dock/jetty.
Oil & gas tankers
Fast ferries & aluminum vessels
Temporary and permanent installations
Rapid response and emergencies
Liquid cargo and naval defense vessels
The storage of floating pneumatic fender
1.When not using for a long time,wash the surface of the fender,dry up and fill in sufficient right amount of compressed air to lay them in a cool.dry and well-ventilated place.
2.The storage place of pneumatic rubber fender should be far away from hear source
3.Try to keep fender away from acid,alkali,grease and organic solvents
4.When not applying the fenders,the pneumatic rubber fender can't be piled up and heavy items can't be piled on the fender
Any interest or need, pls let me know freely.
Claire Su
Email: info75 at florescence.cc
Tel/ Whatsapp/ Skype/
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Dia1.5m L2.0m ship dock pneumatic rubber fender to America | Application of Dia1.5m L2.0m ship dock pneumatic rubber fender to America Pneumatic rubber fender used f... |
 |
Launching lifting ship and marine airbag | Marine airbag Ship and marine airbag Ship and marine airbag is well known as ship launching airbag,marine airbag,rubber airbag,la... |
 |
Dia1.5m L2.5m fishing boat pneumatic floating fender | Pneumatic rubber fenderhas been in use for around 50years. It is the leading anti-collision device for marine application in the world. This compre... |
 |
Pneumatic marine fender | Pneumatic marine fender Pneumatic marine fender which is made of synthetic-cord-reinforced rubber sheet with compressed air inside to enable... |
 |
Ship to berthing Dia1.5m L3.0m marine pneumatic rubber fender to Kuwait | Pneumatic fender Ship to berthing Dia1.5m L3.0m marine pneumatic rubber fender to Kuwait Pneumatic rubber fenders have become an ... |
Похожие товары
 |
Трехмерное мобильное позиционирующее транспортное средство судостроительное и закрывающее оборудование | Продавец: 837294 | Beijing CSTS Technology Co, Ltd. является профессиональным импортно-экспортным предприятием в Кит... |
 |
Best Selling Products 2020 In Europe Amazon Freight Forwarder Logistic Fba Freight Shipping Cost China | Продавец: Haoocean International Logistics(Shanghai)Co.,Ltd. | shipping |
 |
337.1111150-10 ,337.1111150-20 ,T13(Φ13), T160(Φ22), 25.27.104-1(Φ20),175-11 | Продавец: Sihong Tangni Engine Parts Co., Ltd. | Our factory produce nozzle, plunger,injector,valve,etc,which used for the agricultural machinery ... |
 |
7×0,4×135,8×0,25×150,8×0,3×130,8×0,3×140,8×0,35×130,8×0,35×140 | Продавец: Sihong Tangni Engine Parts Co., Ltd. | Contact person : Yolanda Mobile & 5×0.3×130,5×0.35×130,5×0.5&... |
 |
8x0,42x150 : 6CH 31/36 (D67) 9×0.35×155 | Продавец: Sihong Tangni Engine Parts Co., Ltd. | Our factory sell marine nozzle, plunger,injector,valve,etc,which used for the vessel and agricult... |
